Warnings And Symbols; Personal Safety Rules - Primus MB 90 Installation And Maintenance Manual

www.groupdynamics-laundry.com
sales@groupdynamics.lv

2. WARNINGS AND SYMBOLS

TO MINIMIZE THE RISK OF FIRE, INJURY BY ELECTRIC SHOCK OR SERIOUS INJURIES
OF PERSONS OR PROPERTY DAMAGE, PLEASE READ AND FOLLOW THE FOLLOWING
INSTRUCTIONS:

2.1. PERSONAL SAFETY RULES

GENERALY
–
This English version is the original version.
–
This instruction is not complete without „User's manual", „Programming manual" and „Instruction manual for frequency inverter".
–
Before installing, operating or maintaining the machine, read and follow these instructions carefully and keep them in a
handy place for later use. Safety instructions included in manuals for personnel operating the washing machine must be
printed and posted on a visible place near the machine in the laundry room.
–
Follow all basic and valid safety instructions and laws. Do not bypass the instructions stated in the manual and warnings on
the labels. The labels must stay on the machine and they must be legible.
–
Installation and service can be done only by a service organization with proper authorization.
–
Do not let children use, play in, on, or around the machine.
–
Any changes concerning the installation which are not described in this Installation and maintenance manual must be approved
by the supplier or manufacturer. Otherwise, the supplier and manufacturer are not responsible for potential injuries to
operators or for any damages. Interventions in the machine execution or functions are not allowed, and the manufacturer
refuses any responsibility in such cases.
–
During transportation and storage never use excessive forces on the carton box because components can be damaged
protruding the contour line of the machine.
–
The washer extractor must be installed on level. If not, the machine may become unbalanced during extraction and, although
fitted with an unbalance safety, the machine may become seriously damaged what may result in bodily injuries.
–
Never transport the machine without the transporting braces mounted.
–
Never put the machine in operation when the transporting braces are not removed.
–
To prevent the possibility of electrical shock, make sure the washer has been properly grounded in accordance with the
installation instructions and all local codes.
–
Use copper conductors only. This appliance must be connected to a supply circuit to which no lighting units or general-
purpose receptacles are connected.
–
The machine must be connected to the power, ground, water, ventilation and steam supply according to the Installation
manual, in compliance with the local standards done by qualified technicians with proper authorization. The valid standards
for connecting to the local power network (TT / TN / IT, ...) must be followed. In the standard execution, the washer may
not be suitable for connecting to an IT supply system.
–
If your electrical supply has a neutral wire and this wire is not used by the machine and thus not connected to the machine,
make sure the neutral wire is properly isolated by a qualified technician.
–
If you have a machine with frequency inverter do not change the parameters of the inverter. Doing so can cause serious
injury, fire, machine damage, etc.
–
Isolate the frequency inverter elsewhere before removing covers of it. Hazardous voltage present on the frequency inverter
when connected to the power source. Isolate for 10 minutes prior to removing cover. It is not sufficient to use only residual
current device as the protection against electric shock. Always connect protective earth terminal for protection against electric shock.
–
Do not expose the washer-extractor to excessive humidity or extreme temperatures.
–
Keep the top of the machine clean, without the presence of flammable materials. Do not wash or spray the machine with running water.
–
Do not operate the washer extractor when parts are broken or missing or when covers are open. The machine may not
operate until the fixed guards are put correctly in place.
–
Do not tamper with the washer extractor controls and do not bypass the safety instructions and the warnings.
–
Do not store flammable materials around the machine.
–
Define the dangerous areas in the laundry room and obstruct an admission to them during machine's operating.
–
Carefully read and follow the instructions on the packaging of detergents. Observe all warnings, cautions and labels to avoid
personal injury. Store detergents, laundry aids and disinfectants out of reach of children, preferably in a locked cabinet.
–
Do not put articles soiled with explosive solvents and/or dangerous chemical products in the machine for any reason.
–
Do not open door until cylinder remains stopped and water has been drained from cylinder.
–
Always disconnect the power supply and close all water and steam valves while servicing the washer extractor.
–
Although the washer may be in the „off" position, there is still electrical power to the switch supply terminals.
–
Do not repair or adjust belt drive when the machine is in operation. Turn off the main switch! Do not repair or replace any
part of the washer, or attempt any servicing unless specifically recommended in the maintenance instructions.
–
Original or identical parts must be used for replacement in this washer extractor. After servicing replace and secure all panels
in the original way. Take these measures for continued protection against electrical shock, injury, fire and/or property damage.
–
If steam is leaking, turn off the main steam supply and contact the service technician.
–
Turn off the main supply like water, steam, electricity at the end of each operating day.
–
Check the functioning of the door lock mechanism on regular base.
–
The washer must not be operated when the finger protection rubbers are removed or damaged.
–
The washer extractor is intended to be permanently connected to fixed wiring.
–
Regularly once a three months check the proper function of ground and emergency button.
–
If the installed machines operates with coin, token or similar operation, then the owner-installer must provide a remote-
located emergency stop device. This device must be placed in such a way that it is easy and safely accessible for the users.
The emergency stop device controls that at least the control circuit of the washer extractors is interrupted.
2 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE 07/04 513289