Functions And Settings; Operation; Basic - ProLights MINICLIPSEWD User Manual

10

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

To turn on the MINIECLIPSEWD connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then
the unit is ready for operation. You can also adjust the dimmer and zoom using the knobs.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
NOTE - To operate the projector MINIECLIPSETRWD you need a system track. The track system must be in-
stalled and maintained by a suitably qualified person in compliance with latest construction and relevant
legislation. It is the responsibility of the installer to ensure the electrical, mechanical and thermal com-
patibility of the track system and the fittings. The connection to the main network of electric distribution
must be carried out by a qualified electrical installer.
ATTENTION - Mains voltage must be switched off before mounting; maintenance; insert and replace
Adaptors; spots and luminaires.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LED Display
(fig.3).
MENU
Used to access the menu or
to return a previous menu
option
MINIECLIPSEWD - MINIECLIPSETRWD
MENU
UP
Navigates downwards through
the menu list and increases
the numeric value when in a
function
UP DOWN
DOWN
Navigates upwards through
the menu list and decreases
the numeric value when in a
function
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.5- Functions of the buttons
ENTER