Oracle Exadata X5-2 Installation Manual page 65

For the location of the status indicator LEDs, see
and Drives" on page 11 and
Slots" on page 12.
Do not operate the storage server unless all fans, component heatsinks, air baffles,
Caution -
and the top cover are installed. Damage to storage server components can occur if the storage
server is operated without adequate cooling mechanisms.
Do not apply main power to the rest of the storage server until you are ready to configure
Note -
a preinstalled operating system or perform a fresh installation of an operating system. At this
point, power is supplied only to the SP and the power supply fans.
Related Information
"Rear Cable Connections and Ports" on page 61
■
"Ethernet Ports" on page 63
■
"Front Panel Status Indicators, Connectors,
"Back Panel Status Indicators, Connectors, Drives, and PCIe
Connect the Power Cords
Cabling the Storage Server 65