Oracle Exadata X5-2 Installation Manual page 49

The slide-rail latching bracket has a green release tab. This tab is used to release and
Note -
remove the latching bracket so that you can remove connector D.
12. Gently tug on the four CMA connection points to ensure that the CMA
connectors are fully seated before you allow the CMA to hang by its own weight.
To verify that the slide-rails and the CMA are operating properly before routing
13.
cables through the CMA:
Extend all rack anti-tilt devices to prevent the rack from tipping forward
a.
when the storage server is extended.
To reduce the risk of personal injury, stabilize the rack cabinet and extend all anti-tilt
Caution -
devices before extending the storage server from the rack.
For instructions for stabilizing the rack, see
Installation" on page
"Stabilize the Rack for
29.
Install the Cable Management Arm
Installing the Storage Server Into a Rack 49