Oracle Exadata X5-2 Installation Manual page 57

Callout
2
Use your right hand to support the CMA and use your left thumb to push
b.
in (toward the left) on the connector D latching bracket release tab labeled
PUSH (callout 2), and pull the latching bracket out of the left slide-rail and
put it aside [frames 3 and 4].
6. To disconnect connector C:
a. Place your left arm under the CMA to support it.
Use your right thumb to push in (toward the right) on the connector C
b.
release tab labeled PUSH (callout 1), and pull connector C out of the right
slide-rail [frames 1 and 2].
Callout
1
7. To disconnect connector B:
a. Place your right arm under the CMA to support it and grasp the rear end of
connector B with your right hand.
Description
Slide-rail latching bracket
release tab (labeled PUSH)
Description
Connector C release tab
(labeled PUSH)
Installing the Storage Server Into a Rack
Remove the Cable Management Arm
57