Oracle Exadata X5-2 Installation Manual page 56

Remove the Cable Management Arm
a. Press the green release tab (callout 1) on the slide-rail latching bracket
toward the left and slide the connector D out of the left slide-rail [frames 1
and 2].
When you slide connector D out of the left slide-rail, the slide-rail latching bracket portion
of the connector remains in place. You will disconnect it in the next step.
Note -
its own weight. Throughout the remainder of this procedure, the CMA must be supported until
all the remaining connectors are disconnected and the CMA can be placed on a flat surface.
Callout
1
56 Oracle Exadata Storage Server X5-2 Extreme Flash Installation Guide • July 2018
Once you have disconnected connector D, you must not allow the CMA to hang under
Description
Connector D release tab
(green)