Mark the Rackmount Location
The bottom edge of the card corresponds to the bottom edge of the storage server. Measure up
from the bottom of the installation card.
3.
Mark the mounting holes for the front slide-rails.
4.
Mark the mounting holes for the rear slide-rails.
Related Information
"Rack Requirements" on page 20
■
"Install Mounting Brackets" on page 30
■
"Attach Tool-less Slide-Rail Assemblies" on page 35
■
32
Oracle Exadata Storage Server X5-2 Extreme Flash Installation Guide • July 2018
Need help?
Do you have a question about the Exadata X5-2 and is the answer not in the manual?
Questions and answers