Transferring A Call - Uniden UIP165P Owner's Manual

[ 4 1 ] U S I N G Y O U R P H O N E

Transferring a Call

From the handset
1) During a call, press intcom/hold. The call will be put on hold, and the handset
will wait 10 seconds for a transfer command.
2) Use cid/vol/ or redial/p/vol/
call to, and then press the OK soft key. A paging tone sounds on the station you
are transferring the call to. If you select
tone.
3) When the other station accepts the call, you will automatically be disconnected.
To rejoin the call, press talk/flash or
To cancel the transfer but leave the caller on hold, press the CANCEL soft key.
To cancel the transfer and speak to the caller again, press talk/flash or
From the base
1) During a call, press intcom. The call will be put on hold, and the handset will
wait 10 seconds for a transfer command.
2) Use volume
the call to, and then press the OK soft key. A paging tone sounds on the station
you are transferring the call to. If you select
paging tone.
3) When the other station accepts the call, you will automatically be disconnected.
To rejoin the call, press
To cancel the transfer but leave the caller on hold, press the CANCEL soft key.
To cancel the transfer and speak to the caller again, press
to select the station you want to transfer the
A ll
.
/ (up/down) to select the station you want to transfer
.
, all other stations sound the paging
, all other stations sound the
Al l
.
w w w . u n i d e n . c o m
.