note
•To set "AutoTalk" and
"Anykey Answer", see
page 27.
•For the location of the
handset and base
microphones, see
"Controls and
Functions" on page 5-
6. Position yourself as
near to the microphone
as possible.
•If the line is in use by
another handset(s),
L i ne In U s e
"
"
appears in the base's
I nU s e
display, and "
"
appears in the display
of all registered
handsets that are not
in use.
[ 3 3 ] U S I N G Y O U R P H O N E
Switching to the Handset Speakerphone
To switch a call to the handset speakerphone, press
active call. The
icon appears on the display screen while the
speakerphone is in use.
Call Waiting
If a call waiting tone sounds while you are on a call, press talk/flash on the
handset or flash on the base to accept the waiting call. There is a short pause, and
then you will hear the new caller. To return to the original caller, press talk/flash
on the handset or flash on the base again.
during an
w w w . u n i d e n . c o m