Feature Buttons; Placing A Call "On Hold; Transferring A Call; Connecting A Conference Call - Uniden ANA 9710 Operating Manual

This Manual: http://www.manuallib.com/file/2664034

Feature Buttons

Note: The exact operation of the Feature Buttons depends on how
your PBX system is configured. Contact your PBX
Administrator for more information.

Placing a call "on hold"

Press hold . You will hear a
"beep" and see:
To resume the call, press hold or talk .

Transferring a Call

Press xfer (TRANSFER).
You will hear a "beep" and see:
The dial numbers saved in xfer
memory is shown on the display
after 2 seconds.
When the receiving party
answers, press xfer to complete
the transfer.

Connecting a Conference Call

To connect a second party to a
call in progress, press conf
(CONFERENCE). You will
hear a "beep" and see:
The dial numbers saved in conf
memory is shown on the display
after 2 seconds.
When the other party answers,
press conf to have a three-way
conversation.
26