Handset And Base Setup Menu Options - Uniden UIP165P Owner's Manual

Setting the Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program
your local area code in your phone. If you get a call from within your area code,
you'll only see the 7-digit phone number. If you get a call from outside your area
code, you'll see all 10 digits.
If your calling area requires 10-digit dialing, do not program this option.
1) Press the MENU soft key. Select the Global Setup
menu, and then the Area Code submenu.
2) Press the number keypad (0-9) to enter a 3-digit area
code.
3) Press the OK soft key. You will hear a confirmation tone.

Handset and Base Setup Menu Options

The following submenu options must be set separately for each handset and the
base.
Selecting a Ringer Volume
You can choose from one of three ringer volumes.
From the handset
1) Press the MENU soft key. Select the Handset Setup menu, and then the Ringer
Volume submenu.
2) Press cid/vol/
, or .
L O W O F F
w w w . u n i d e n . c o m
or redial/p/vol/ to select ,
H IG H
M A I N M E N U O P T I O N S [ 2 4 ]
note
If the area code
already been stored
in memory, the stored
area code will be
displayed. To change
it, use the DELETE
soft key and number
keys to enter the new
area code.