Battery Operated Acre Counter Operation - Landoll 5210 Operator's Manual

Battery Operated Acre Counter
Operation
The battery operated acre counter operates in one of two
modes. In sleep mode, the display is blank, and the
counter is accumulating acres. Sleep mode will be
entered if a button is not pressed for 20 seconds. In entry
mode, the display is on, and the operator can enter
values. To get into entry mode, press the FUNC button. If
you continue to press the FUNC button, the acre counter
will cycle through the functions that it can perform. The
icons above the digits indicate which function is selected
(See Figure 4-8.)
The available functions are:
• Field Acres
• Total Acres
• Pulses per Mile
• Width
• Password
1. Field Acres Display
a. Press the FUNC button until the "FIELD" icon
appears in the display. The digits indicate the
acres covered since the field acre counter was
cleared (See Figure 4-9.)
b. To clear the field acre count, depress the UP and
DOWN buttons for 2 seconds.
c. Field acres will count in tenths of an acre up to
999.9 acres.
OPERATION AND MAINTENANCE
0000.0
Acre Counter
FUNC
acremeter console
Figure 4-8: Acre Counter Console
FIELD
417.0
ACRES
field acres display
Figure 4-9: Field Acres Display
UP DOWN
4-11