CRANKSHAFT ASSEMBLY AND BALANCER SHAFT
CJ
4. Check:
• Crankshaft sprocket "1"
Damage -} Replace the crankshaft.
5. Check:
• Crankshaft journal oil passage
Obstruction -} Blow out with compressed
air.
EAS2B210
INSTALLING THE CRANKSHAFT ASSEM-
BLY
1. Install:
• Crankshaft assembly
TIP _____________ _
Install the crankshaft assembly with the crank
shaft installer pot "1", crankshaft installer bolt
"2", adapter (M12) "3" and spacer "4".
Crankshaft installer pot "1"
90890-0127 4
Installing pot
YU-90058
Crankshaft installer bolt "2"
90890-01275
Bolt
YU-90060
Adapter (M12) "3"
90890-01278
Adapter#3
YU-90063
Spacer (crankshaft installer) "4"
90890-04081
Pot spacer
YM-91044
ECA13970
_j _______ _
To avoid scratching the crankshaft and to
ease the installation procedure, lubricate
the oil seal lips with lithium-soap-based
grease and each bearing with engine oil.
TIP _____________ _
Hold the connecting rod at top dead center
(TDC) with one hand while turning the nut of the
crankshaft installer bolt with the other. Turn the
crankshaft installer bolt until the crankshaft as
sembly bottoms against the bearing.
1
6-69
2