Yamaha WR450FB 2012 Owner's Service Manual page 23

4.
Connect:
•Lead
•Coupler
•Connector
TIP _ _ _ _ _ _ _ _ _ _ _ _ _ _
•When connecting a coupler or connector,
push both sections of the coupler or connec-
tor together until they are connected securely.
• Make sure all connections are tight.
BASIC SERVICE INFORMATION
5. Check:
•Continuity
(with the pocket tester)
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
TIP _ _ _ _ _ _ _ _ _ _ _ _ _
• If
there is no continuity, clean the terminals.
•When checking the wire harness, perform
steps (1) to (4).
• As a quick remedy, use a contact revitalizer
available at most part stores.
1-14