Code - Emerson Rosemount 5081FG Reference Manual

Rosemount 5081FG

Code

Figure 3-7. Code
3-8
Refer to Figure 3-7. After pressing the PROG key, this screen will display if
security is enabled (see Set Code). Use this screen to identify a specific
analyzer in a process to prevent accessing an adjacent analyzer when using
the IRC.
Press ENTER to begin editing. At this point, you can either specify the
analyzer by its access code or view its code if it is unknown.
1. To gain further access to the screens in the PROGRAM MENU branch,
enter the correct three-digit analyzer access code using the arrow keys
and press ENTER. If security is disabled, this screen does not appear
and the system displays the FAULT VAL screen.
2. If the analyzer access code is un-known, enter 555 and press ENTER to
access the DISPLAY CODE screen. In that screen you will be able to
view the analyzer access code.
Reference Manual
00809-0100-4882, Rev AB
May 2019