Emerson Rosemount 5081FG Reference Manual page 104

Two-wire in-situ oxygen analyzer (550 c to 1600 c)
Table of Contents

Advertisement

Rosemount warrants that the equipment manufactured and sold by it will, upon
shipment, be free of defects in workmanship or material. Should any failure to
conform to this warranty become apparent during a period of one year after the
date of shipment, Rosemount shall, upon prompt written notice from the
purchaser, correct such nonconformity by repair or replacement, F.O.B. factory of
the defective part or parts. Correction in the manner provided above shall
constitute a fulfillment of all liabilities of Rosemount with respect to the quality of
the equipment.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES OF QUALITY WHETHER WRITTEN, ORAL, OR IMPLIED
(INCLUDING ANY WARRANTY OF MERCHANTABILITY OF FITNESS FOR
PURPOSE).
The remedy(ies) provided above shall be purchaser's sole remedy(ies) for any
failure of Rosemount to comply with the warranty provisions, whether claims by
the purchaser are based in contract or in tort (including negligence).
Rosemount does not warrant equipment against normal deterioration due to
environment. Factors such as corrosive gases and solid particulates can be
detrimental and can create the need for repair or replacement as part of normal
wear and tear during the warranty period.
Equipment supplied by Rosemount but not manufactured by it will be subject to
the same warranty as is extended to Rosemount by the original manufacturer.
At the time of installation it is important that the required services are supplied to
the system and that the electronic controller is set up at least to the point where it
is controlling the sensor heater. This will ensure, that should there be a delay
between installation and full commissioning that the sensor being supplied with ac
power and reference air will not be subjected to component deterioration.
The oxygen probe is designed for industrial applications. Treat with care to avoid physical
damage. The probe contains components made from ceramic, which are susceptible to
shock when mishandled. THE WARRANTY DOES NOT COVER DAMAGE FROM
MISHANDLING. WARRANTY IS VOID IF OUTER PROTECTION TUBE IS BROKEN.
WARRANTY
Reference Manual

Advertisement

Table of Contents
loading

Table of Contents