Table of Contents
Advertisement
Rosemount 5081FG
Figure 3-19. Set Code
DIAGNOSTICS MENU
Show Fault
3-16
The DIAGNOSTICS MENU branch of the menu tree allows you to examine
outputs, current faults, and unit information. None of the items in the
DIAGNOSTICS MENU are editable. This branch of the menu tree may be
accessed by pressing DIAG on the IRC when in the PROCESS DISPLAY
screen (Normal or Faulted). Each screen in this branch is accessed
sequentially by pressing NEXT. Refer to the menu in Figure 3-5 when
reviewing the following menu and screens.
Refer to Figure 3-20. After pressing DIAG, this screen displays. Pressing
ENTER accesses a screen displaying the current fault (if any). If more than
one fault exists, and you are in the FAULT screen, press NEXT to go to the
next fault. Information on the fault screens can be found in Section 5:
Troubleshooting. Press EXIT to return from this fault sub-menu and press
NEXT to access the T/C mV screen.
Reference Manual
00809-0100-4882, Rev AB
May 2019
Advertisement
Table of Contents
