Operation; Overview; Display; Menu Tree - Emerson Rosemount 5081FG Reference Manual

Rosemount 5081FG

OPERATION

Overview

Display

Menu Tree

Figure 3-4. Normal Operation Display
\
3-4
This section explains the operator controls and displays of the Two-Wire
In-Situ Oxygen Analyzer. The use of the Infrared Remote Control (IRC) and
the Rosemount 5081 transmitter Liquid Crystal Display (LCD) are described
in detail.
HART/AMS operation is not covered here. Refer to Section 4: HART/AMS.
The LCD on the circuit end of the Rosemount 5081 transmitter displays O
concentration, cell temperature, and 4-20 mA output current during normal
operation (Figure 3-4). The LCD will also display fault conditions when they
occur. To interact with the transmitter, use the IRC and navigate through a
series of menus displayed on the LCD.
The screens that can be displayed are shown in the menu tree of Figure 3-5.
These screens are displayed on the LCD and are accessed using the IRC
keypad.
Reference Manual
00809-0100-4882, Rev AB
May 2019
2