Table of Contents
Advertisement
Rosemount 5081FG
Handling the Analyzer
System Considerations
Figure 1-3. Typical System
Installation
1-6
The probe was specially packaged to prevent breakage due to handling. Do
not remove the padding material from the probe until immediately before
installation.
It is important that printed circuit boards and integrated circuits are handled only when
adequate antistatic precautions have been taken to prevent possible equipment damage.
The oxygen probe is designed for industrial applications. Treat each component of the
system with care to avoid physical damage. Some probe components are made from
ceramics, which are susceptible to shock when mishandled.
Prior to installing your Rosemount Two-Wire In-Situ Oxygen Analyzer, make
sure you have all the components necessary to make the system installation.
Ensure all the components are properly integrated to make the system
functional.
After verifying that you have all the components, select mounting locations
and determine how each component will be placed in terms of available line
voltage, ambient temperatures, environmental considerations, convenience,
and serviceability. Figure 1-1 shows a typical system package. A typical
system installation is shown in Figure 1-3.
Reference Manual
00809-0100-4882, Rev AB
May 2019
Advertisement
Table of Contents
