Emerson ROSEMOUNT 5081-A Instruction Manual page 63

MODEL 5081-A
7.8.4 Procedure using Deltav
Access: deltaV Explorer/transducer Block/Properties, Amperometric Sensor tab
1. Enter the desired barometric pressure units from the following:
mm Hg
kPa
atm
bar
in Hg
Parameter: Barometric Pressure unit (BAR_PRESSuRE_uNIt)
2. If % saturation units were selected, enter the desired % saturation pressure.
Parameter: Percent Saturation Pressure (PERCENt_SAtuRAtIoN_PRESSuRE)
SECTION 7.0
PROGRAMMING
57