Emerson ROSEMOUNT 5081-A Instruction Manual page 2

Rosemount Analytical designs, manufactures, and tests its products to meet many national and international standards.
Because these instruments are sophisticated technical products, you must properly install, use, and maintain them to
ensure they continue to operate within their normal specifications. the following instructions must be adhered to and
integrated into your safety program when installing, using, and maintaining Rosemount Analytical products. Failure to
follow the proper instructions may cause any one of the following situations to occur: Loss of life; personal injury;
property damage; damage to this instrument; and warranty invalidation.
• Read all instructions prior to installing, operating, and servicing the product. If this Instruction Manual is not the correct
manual, telephone 1-800-654-7768 and the requested manual will be provided. Save this Instruction Manual for future
reference.
• If you do not understand any of the instructions, contact your Rosemount representative for clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
• Install your equipment as specified in the Installation Instructions of the appropriate Instruction Manual and per
applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• to ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by Rosemount.
unauthorized parts and procedures can affect the product's performance and place the safe operation of your process
at risk. Look alike substitutions may result in fire, electrical hazards, or improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is being
performed by qualified persons, to prevent electrical shock and personal injury.
If a 375 or 475 universal Communicator is used with these transmitters, the software within the 375 or 475 may require modification.
If a software modification is required, please contact your local Emerson Process Management Service Group or National Response
Center at 1-800-654-7768.
this manual contains instructions for installation and operation of the Model 5081-A Foundation Fieldbus
two-Wire Chlorine, dissolved oxygen, and ozone transmitter. the following list provides notes concerning
all revisions of this document.
Rev. Level Date
A 6/02
B 11/02
C 1/03
d 4/03
E 6/03
F 11/03
I 1/11
J 5/11
K 03/12
L 11/12
M 10/14
Emerson Process Management
2400 Barranca Parkway
Irvine, CA 92606 uSA
tel: (949) 757-8500
Fax: (949) 474-7250
http://www.rosemountanalytical.com
© Rosemount Analytical Inc. 2014
ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEEDING!
CAUTION
About This Document
Notes
this is the initial release of the product manual. the manual has been reformatted to
reflect the Emerson documentation style and updated to reflect any changes in the product offering.
Revised drawings on pages 13-16.
Fixed minor typos.
Specs updates.
Agency certification update.
updated Flat Mount drawing on page 10.
Removed "polyester" from enclosure specifiations, updated © info
updated Baseefa/Atex label drawing pg 24.
update addresses - mail and web
Added Fieldbus specifications, updated ItK revision and CE certifications
Changed agency water exposure testing description to "type".