Redialing The Last Number Called (H/O 200); Using Your Phone With Call Waiting (H/O 100 And H/O 200); Paging The Handset (H/O 200); Changing Channels (H/O 200) - Uniden H/O 100 Owner's Manual

Cordless home organizer

Table of Contents

4. While on call, enter the number from the Handset

— OR —

Enter the memory location number where the second number is stored.

Redialing the last Number Called (H/O 200)

1. Press talk .

2. Press the redial/pause key on the Handset.

3. The last number you called is dialed.

Note: You must subscribe to call waiting service from your local phone

company to use this feature.

1. While talking, you hear the call waiting signal.

2. Press flash on the Handset to switch to that call or press the switch-hook.

3. To switch back to your original call, press flash on the Handset, or press the

switch-hook on the base again.

1. Press the Function Key under

2. Press the Function Key under

3. Press the Function Key under

Note: If you have more than one cordless phone in your house, they must

be set to different channels. This function works only when the

phone is in use.

The channel key on the Handset allows you to choose among 40 factory set

channels. During the course of a conversation if you hear static or noise causing

difficulty in hearing the other party, change channels by:

1. Pressing the channel key on the Handset.

2. The talk/batt low LED on the Handset will flash, indicating the H/O 200 is

finding the best channel available.

Table of Contents

H/o 200