Entering The Local Area Code - Uniden DXI665 User Manual

To reestablish communication between the Handset and Base Unit:
1. Restore power to the Base Unit.
2. Place the Handset back on the Base Unit.
3. The Battery icon will blink
to indicate that the Digital
Security Code is set.

Entering the Local Area Code

Please refer to the foldout in front of your operating guide for key positions.
You must enter your local area code for the Caller ID redial features to work
properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2. Press flash/function twice.
3. Enter your local area code. For example, 817.
4. Press mem . A confirmation tone sounds
and the display remains on for two
seconds.
5. Place the Handset on the Base. The
Battery icon will blink to indicate that the
area code is stored.
AREA CODE
AREA CODE
26
1-
1-817
STORING
6 CALLS