Product Overview - Huawei SmartACU2000D Quick Manual

Smart array controller with no pid module

Hide thumbs Also See for SmartACU2000D:

1. The information in this document is subject to change due to version upgrade or other reasons.

Every effort has been made in the preparation of this document to ensure accuracy of the

contents, but all statements, information, and recommendations in this document do not

constitute a warranty of any kind, express or implied.

2. Before installing the device, closely read the SmartACU2000D Smart Array Controller User

Manual (with no PID module) to get familiar with product information and precautions.

3. Only qualified and trained electrical technicians are allowed to operate the device. Operation

personnel should understand the composition and working principles of the grid-tied PV power

system and local regulations.

4. Before installing the device, check that the package contents are intact and complete against the

packing list. If any damage is found or any component is missing, contact your dealer.

5. Use insulated tools when installing the device. For personal safety, wear insulation gloves and

protective shoes.

6. When installing the device and connecting cables, use appropriate tools and take necessary

protective measures to avoid damaging the device.

7. Huawei shall not be liable for any consequence caused by violation of the storage, installation,

and operation regulations specified in this document and the user manual.

Product Overview

Name

Model

SmartACU2000D-D-00

Smart array

SmartACU2000D-D-02

controller

SmartACU2000D-D-05CN

Voltage Level

Configuration

•

00: one MBUS route

D: ≤ 800 V

•

02: two MBUS routes

three-phase

•

05CN: one MBUS route and 4G

AC input

antenna

Table of Contents