Ir Pass-Through - SIIG AV-GM02J3-S1 User Manual

IR Extenders
IR Blaster
IR Sockets
IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from
the other enf to control the devices corresponding to the IR signals.
IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of
the corresponding devices.
CAUTION!
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please
check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover
the damage.
Definition of IR Earphone Jack
IR Blaster
You can buy any IR extension cables in the market that are compatible to the definition of
the IR sockets for the matrix if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.

IR PASS-THROUGH

IR Receiver
IR Receiver
5