SIIG AV-GM04Q3-S1 Manual

Hdmi over ip multicast system with poe support

Advertisement

Quick Links

HDMI over IP Multicast System with PoE support
TX
RX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV-GM04Q3-S1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG AV-GM04Q3-S1

  • Page 1 HDMI over IP Multicast System with PoE support...
  • Page 2: Table Of Contents

    However, like all electronic equipments, the AV-GM04Q3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3: Introduction

    With broadcasting management software and Gigabit Ethernet network switch (supported IGMP), AV-GM04Q3-S1 is a complete HD video broadcasting solution for digital signage. It can transmit Full HD 1080p HDMI video broadcasting over IP network. The broadcasting format can be Point to Point, Point to Many, and Multi-Casting.
  • Page 4: Package Contents

    PACKAGE CONTENTS AV-GM04Q3-S1-TX AV-GM04Q3-S1-RX ● 1x AV-GM04Q3-S1-RX ● 1x AV-GM04Q3-S1-TX ● 1x IR receiver cable ● 1x User Manual ● 1x IR blaster cable ● 1x User Manual SPECIFICATIONS Model Name AV-GM04Q3-S1 Technical AV-GM04Q3-S1[Tx] AV-GM04Q3-S1[Rx] Role of usage Transmitter [TX]...
  • Page 5: Panel Descriptions

    Relative humidity 20~90% RH [no condensation] PANEL DESCRIPTIONS Transmitting unit ► AV-GM04Q3-S1-TX Front Panel +5V DC: Connect to 5V DC power supply (optional) RS-232: Connect to PC serial port with a DSUB-9 male-male cable here Mini USB: for F/W update S/PDIF Output (TOSLINK) Stereo Output (3.5mm)
  • Page 6: Receiving Unit

    HDMI LOOPOUT: Connect to a HDMI display with a HDMI male-male cable. Dip Switch: Video channel setting (Please refer to “Notes”) HDMI Signal OUT: RJ-45 Network connector Receiving unit ► AV-GM04Q3-S1-RX Front Panel LED Indicator: Power and signal LED indicator IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver...
  • Page 7 ID Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 ID Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ↑ ↓ ↓ ↓ ↓ ↑ ↓ ↑ ↓...
  • Page 8: Connection Diagram

    CONNECTION DIAGRAM...
  • Page 9: Ir Pass-Through

    IR PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other enf to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices.
  • Page 10: Warranty

    The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM04Q3-S1 features and specifications is subject to change without further notice.

This manual is also suitable for:

Av-gm04q3-s1-txAv-gm04q3-s1-rx

Table of Contents