Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG AV-GM02M3-S1 Series
Summary of Contents for SIIG AV-GM02M3-S1 Series
- Page 1 HDMI Extender over Dual Cat.X (powered at P/N: AV-GM02M3-S1...
-
Page 2: Table Of Contents
Safety and Notice The AV-GM02M3-S1 HDMI Extender over Dual Cat.X (powered at TX) has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM02M3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 3: Introduction
INTRODUCTION The AV-GM02M3-S1 HDMI Extender over Dual Cat.X (powered at TX) boosts up the audio/video transmission distance up to 60m in HDTV 1080i format, 40m in HDTV 1080p format, or 20m in HDTV 1080p with 36-bit color depth. With two cost effective solid category cables, users can readily extend HDTV sources from DVD player, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. -
Page 5: Specifications
SPECIFICATIONS Model Name AV-GM02M3-S1 Technical AV-GM02M3-S1[Tx] AV-GM02M3-S1[Rx] Role of usage Transmitter [TX] Receiver [RX] HDMI compliance HDMI Deep Color & full 3D HDCP compliance Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color HDMI over UTP Full HD (1080p)-40m (130ft) [CAT5e] / 50m (165ft) [CAT6] transmission [24-bit]... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Transmitting unit ► AV-GM02M3-S1-TX Front Panel Rear Panel HDMI IN: Connect to a HDMI source device with a HDMI male-male cable. +5V DC: Connect to a 5V DC power supply unit. A/V SIGNAL: Link a Cat-5/5e/6 cable to the RJ45 A/V SIGNAL port on the RX unit of AV-GM02M3-S1. - Page 7 CTRL CHANNEL: Link a Cat-5/5e/6 cable to the RJ45 CTRL CHANNEL port on the TX unit.
-
Page 8: Connection Diagram
CONNECTION DIAGRAM... -
Page 9: Hardware Installation
HARDWARE INSTALLATION 1. Connect a HDMI source to the transmitting unit of AV-GM02M3-S1. 2. Connect a HDMI display or projector to the receiving unit of AV-GM02M3-S1. 3. Connect two Cat-5/5e/6 cables between the transmitting and receiving units via A/V SIGNAL and CTRL CHANNEL RJ45 ports respectively. -
Page 10: Hdmi Pin Definition
HDMI PIN DEFINITION Type A (Receptacle) HDMI Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15... -
Page 11: Cat5 / Rj45
CAT5 / RJ45 Audio/Video Signal port Control Channel port... -
Page 12: Notice
NOTICE 1. When adjusting the signal level on the receiver unit, please dial the rotary control switch from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! 2. -
Page 13: Warranty
Also, the technical information contained herein regarding the AV-GM02M3-S1 features and specifications is subject to change without further notice. Support For more info or tech support http://www.siig.com/support April, 2018...
Need help?
Do you have a question about the AV-GM02M3-S1 Series and is the answer not in the manual?
Questions and answers