Panel Descriptions; Transmitting Unit ► Tx - SIIG AV-GM02J3-S1 User Manual

PANEL DESCRIPTIONS

Transmitting unit ► AV-GM02J3-S1-TX
Front Panel
1. IR Flasher: 3.5mm socket for plugging in the extension cable of IR flasher
2. IR Receiver: 3.5mm socket for plugging in the extension cable of IR receiver
3. HDMI IN: connect to a HDMI source device with a HDMI male-male cable
4. +5V DC: connect to 5V DC power supply unit
Rear Panel
5. IR BNC: Connect to the same IR BNC jacks on the receiving unit respectively.
6. R, G, B BNC: Connect to the same R, G, B BNC jacks on the receiving unit respectively.
7. Sync BNC: Connect to the same Sync. BNC jacks on the receiving unit respectively.
3