However, like all electronic equipments, the AV-GM03K3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
For AV-GM03K3-S1, the RX and TX relationship between source and destination units are adjustable through the settings of DIP switches. After finishing the setup, the serial connection has a fixed communication channel between local and remote sites.
SPECIFICATIONS Model Name AV-GM03K3-S1 (TX) AV-GM03K3-S1 (RX) Technical Role of usage Transmitter [TX] Receiver [RX] Transmitter [TX] Receiver [RX] Transmission length Up to 1,000m (1,100yds) [CAT5e] Baud rate Up to 57.6kbps in cascade mode Input 1x RS-232 1x RJ-45 1x RS-232...
Hardware Installation 1. Connect your serial RS-232 source to the transmitting unit. 2. Connect your serial receiver to the receiving unit. 3. Connect your CAT-5/5e/6 cable between the transmitting and receiving units. 4. Make sure your CAT-5/5e/6 cable is tightly connected and not loose. 5.
Serial Command In order to control the remote units, AV-GM03K3-S1 offers a set of serial command to setup the baud rate, ID, and enable of the feedback from the remote units. Table 1 — Serial Command Protocol Byte # Content...
WARRANTY The SELLER warrants the AV-GM03K3-S1 to be free from defects in the material and workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surges.
Need help?
Do you have a question about the AV-GM03K3-S1 and is the answer not in the manual?
Questions and answers