Installing The Battery; Installing The Belt Clip - Uniden DECT Elite 9005 Owner's Manual

Installing the Battery

Use only the Uniden BT-694 rechargeable battery pack supplied
with your cordless telephone.
Locate the battery Locate the battery
pack, battery cover pack, battery cover
and the handset. and the handset.
Handset Handset
Push the battery pack connector Push the battery pack connector
in firmly. (You should hear it click in firmly. (You should hear it click
into place.) Gently tug on the into place.) Gently tug on the
battery wires to make sure the battery wires to make sure the
connection is secure. connection is secure.
Place the cover over the Place the cover over the
battery compartment and battery compartment and
slide it up into place. slide it up into place.

Installing the Belt Clip

Insert the tabs on the sides of the belt clip into
the holes on either side of the handset. Press
the belt clip down until it clicks into place. (Tug
on the clip to make sure it's secure.)
To remove the belt clip, gently pull the tabs out
of the holes, then slide the belt clip off of the
handset.
Battery Battery
pack pack
Battery Battery
cover cover
Line up the red and black Line up the red and black
wires on the battery pack wires on the battery pack
connector with the sticker in connector with the sticker in
the handset's battery the handset's battery
compartment. compartment.
3