Figure 21: Changing Ip Address Via Web Gui - SMC Networks ClimateWorx FieldServer ProtoNode FPC-N34 Startup Manual


From the Web GUI landing page, click on "Setup" to expand the navigation tree and then select
"Network Settings" to access the IP Settings menu.

Modify the IP Address (N1 IP Address field) of the ProtoNode Ethernet port.

If necessary, change the Netmask (N1 Netmask field).

Type in a new Subnet Mask.

If necessary, change the IP Gateway (Default Gateway field).

Type in a new IP Gateway.
NOTE: If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should be set to the
IP Address of that router.

Reset ProtoNode.

Unplug Ethernet cable from PC and connect it to the network hub or router.

Record the IP Address assigned to the ProtoNode for future reference.
NOTE: For FieldPoP™ information, refer to the FieldPoP™ Device Cloud Start-up Guide online at
the Sierra Monitor.com Resource Center.
www.sierramonitor.com/customer-care/resource-center
(Figure

Figure 21: Changing IP Address via Web GUI

Page 23 of 46
ClimateWorx ProtoNode Start-up Guide
21)