Table of Contents
Advertisement
Mounting the X-CUBE+LCD unit
What has to be
The X-Cube+LCD unit has to be mounted in the projector.
done
Necessary Tools
Screwdriver 5 mm.
Mounting the X-
To mount the X-cube+LCD unit, follow the next procedure:
Cube+LCD
Illustration
Frontside X-Cube+LCD
Electrical
Mounting the X-Cube+LCD unit, it must be electrically connected to the driver board
Connection of the
and to the power. Follow the next procedure:
X-Cube.
BARCO ——————————————————— 12
Step
Action
1
Slide the X-cube+LCD unit into the projector very carefully,
facing its frontside (no panel) to the lens opening.
2
Secure the postion of the X-Cube+LCD on the base with
the 2 screws of the removed one. Use a flat screwdriver
with a shaft of 150mm to tighten the screws.
Step
Action
1
Insert the cable into the connector.
2
Press very carefully on both sides of the
cable lock to lock.
3
Insert the power connector.
————————————— Projection Systems
Image
1
1
Cable connectors
Illustration
Press to unlock
connector
cable
Connector
Press to lock
Advertisement
Table of Contents
