Related Manuals for Barco R813307K
Summary of Contents for Barco R813307K
- Page 1 BARCO PROJECTION SYSTEMS LCD + X-CUBE 6*00 Kit R813307K & R814577K INSTALLATION MANUAL KIT LCD + X-CUBE for R6*00 & SIM6 PROJECTORS Date:08032001 Rev: 01 Art. No.: R5976148...
- Page 2 Produced by BARCO NV, March 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
-
Page 3: Table Of Contents
Safety This procedure is intended for use only by qualified service technicians who have been trained and authorized by BARCO ! Hot Surface Switch the projector to stand by and let it cool down for at least 15 minutes before starting with the LCD + X-Cube replacement. - Page 4 Wear a wrist band which is connected to the ground while handling the static sensitive Protection Steps parts. Part Listing The following parts are included in the kit : Kit: R813307K R6300 & RSIM6 (R9040100) Part Number Description Indication R813307...
-
Page 5: Access To The X-Cube+Lcd Unit
Open both lens locks by pulling them backwards. Take the lens out of the lens house. Illustrations on Removing the Lens Image 1 Motor part Fixation screws Lens lockings Image 2 To be continued on next page. BARCO ——————————————————— 5 ————————————— Projection Systems... - Page 6 Image Pull out the 3 rubber cover pieces, covering the cover screws. Turn out the 3 cover screws. Take off the top cover. Illustrations on Top Cover Removal Image 1 Image 2 Image 3 BARCO ——————————————————— 6 ————————————— Projection Systems...
-
Page 7: Removing The X-Cube+Lcd Unit
Loosen both fixation screws on the base of the X-cube using a Philips screwdriver with a shaft of minimum 150 Take out the unit from the main frame very carefully. Illustration Power connector Cable connectors BARCO ——————————————————— 7 ————————————— Projection Systems... -
Page 8: Disassembling The X-Cube+Lcd Unit
Press very carefully on both sides of the cable lock to unlock. Press to unlock Pull out the cable (see image 1). connector cable Connector Press to lock Illustration Removed X-Cube Unit To be continued on next page. BARCO ——————————————————— 8 ————————————— Projection Systems... -
Page 9: Disassembling The X-Cube+Lcd Unit (Continued)
Turn out the 4 fixing screws with a nutdriver or flat screw- driver. Take off the metal unit holder. Turn out the 4 spacers and remove the washers Illustration Image 2 Image 1 Image 3 BARCO ——————————————————— 9 ————————————— Projection Systems... -
Page 10: Assembling The X-Cube+Lcd Unit
Put the Analog buffer unit on the spacers of the support plate. Secure the position with the 4 fixation screws (Philips screwdriver). Illustration Image 1 Image 2 Image 3 To be continued on next page. BARCO ——————————————————— 10 ————————————— Projection Systems... -
Page 11: Assembling The X-Cube+Lcd Unit (Continued)
Action Illustration Insert the flat cable in the respective connec- tor (see image). Press to unlock Press very carefully on both sides of the cable to lock. connector cable Connector Press to lock Illustration BARCO ——————————————————— 11 ————————————— Projection Systems... -
Page 12: Mounting The X-Cube+Lcd Unit
Step Action Illustration Insert the cable into the connector. Press to unlock Press very carefully on both sides of the cable lock to lock. connector Insert the power connector. cable Connector Press to lock BARCO ——————————————————— 12 ————————————— Projection Systems... -
Page 13: Re-Installing The Covers And The Lens
Put the top cover on its place. Turn in the 3 fixation screws. Cover the screws by insertion of the 3 rubber cover peaces Illustrations on Top Cover Installation Image 1 Image 2 To be continued on next page. BARCO ——————————————————— 13 ————————————— Projection Systems... - Page 14 For zoom lenses: ensure that the teeth of the lens motor match those of the tooth profile (D). If not, turn the lens a little. Illustrations on Removing the Lens Image 1 Image 2 Image 3 BARCO ——————————————————— 14 ————————————— Projection Systems...
Need help?
Do you have a question about the R813307K and is the answer not in the manual?
Questions and answers