Assembling the X-CUBE+LCD Unit
What has to be
The X-Cube+LCD unit has to be re-assembled.
done
Necessary Tools
Screwdriver 8 mm.
Nutdriver 5.5
Philips screwdriver
Necessary Parts
New X-Cube+LCD unit
Assembling the
To assemble the X-cube assembly, follow the next procedure:
X-cube Assembly
Illustration
Image 1
BARCO 10
Step
Action
1
Turn in the 4 spacers on the X-Cube.
2
Put the metal unit holder on the inserted spacers.
3
Secure the position of the metal plate with 4 screws and
washer, using a nutdriver or flat screwdriver.
4
Put the Analog buffer unit on the spacers of the support
plate.
5
Secure the position with the 4 fixation screws (Philips
screwdriver).
Image 2
Image 3
To be continued on next page.
Projection Systems
Image
1
2
3