Mounting The Polarizer Unit - Barco ELM Series Installation Manual

Mounting the Polarizer Unit

What has to be The filter unit has to be mounted on the horizontal shift plate with insertion of two
done springs. This allows a tilting adjustment of the filter unit.
Necessary Tools A flatblade screwdriver for M5 (No 7)
Mounting the To mount the filter unit, follow the next procedure:
filter unit
Illustrations
D
C
E
Image 3
BARCO ——————————————————— 11
Step Action
1 Remove the plastic protective foil from polarizer.
2 Place the filter unit (A) on the bottom side of the horizontal
shift plate (B) with insertion of 2 springs (C) on the place of
the fixation holes.
3 Fix the polarizer unit to shift plate using 2x screw with
washer (D) in such a way that the space between both
units is about 20mm.
4 Lock the screw end with a nut (E) to determine the adjust-
ment range and also to prevent drop of the polarizer when
adjusting too far.
B
A
Image 1
D
20m m
E
Image 2
————————————— Projection Systems
Image
1
2&3
2&3
2