Introduction To The Pop-Up Windows - Gree A Series Service Manual

A Series Modular-type Air-cooled (Heat Pump) Chiller
No Item
4 E-CLEAR
5 GENERAL
Homepage icon
6
ON/OFF key
7
(1)The unit status will be displayed at the left upper corner of the control panel.
(2)Generally the unit name is displayed at the left upper corner of the control panel. If there
is BMS communication, the BMS alert "Remote Control:On" and the unit name will be
displayed circularly in five minutes.
(3)Generally the unit name is displayed at the left upper corner of the control panel. If there
are errors, their icons and names will be displayed circularly (one time every second)
instead.
4.4.3

Introduction to the Pop-up Windows

When any operation fails or is incorrect, a window will pop up
(1)When this is any pop-up window, except touching "OK", any other touching is ineffective.
Then, the pop-up window would disappear and normal operation to the control panel
resumes.
(2)When it is detected that there is no any operation in ten seconds after a window pops up,
it will disappear and normal operation to the control panel resumes.
It is used to access to the error clearing and "Unlock discharge
failure" page.
It is used to access to the general setting pages.
It is used to go back to the homepage.
On/Off key. When"Contact ON/OFF"or ON/OFF timer has been
activated, ON/OFF status will change with the actual status of
the unit.
22
Interpretation