Western Digital Ultrastar Data60 Manual page 20

EcoDesign Disclosures
Removing the Enclosure from the Rack
Step 25 : Grasp both handles at the front of the enclosure and pull with even pressure to extend the
chassis out of the rack until it is stopped by the safety latches. Make sure that the top cover
comes with the chassis as it is extended out of the rack. The safety latches will prevent the
enclosure from coming out of the rack completely.
Step 26 : Remove the chassis from the rack.
a. Be prepared to support the enclosure once it is free of the rails by having a second
person or a lift to support the enclosure
b. Grasp both handles at the front of the enclosure and pull with even pressure until the
enclosure will not extend further.
c. Locate the safety catches on the inner rails attached to the enclosure.
Warning: The handles on the front of the chassis are not intended
to be used to support the weight of the Ultrastar Data60 . Lifting
the unit by the chassis handles or trying to support the unit on the
handles can cause them to fail. This can cause serious damage to
the unit or serious bodily harm to those handling the unit. Always
team lift the chassis by gripping the underside of the unit, and
never try to lift a chassis that is filled with drives.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
17