Product Liability; Disposal - KBR multicount D5-3P-75A-MID Quick Manual

EN
GEFÄHRLICHE SPANNUNG
The multicount D5-xxx-MID should only be used for measuring elec-
trical energy and can not be operated outside the specified technical
data.
When installing or replacing the meter, the conductor, to which the
meter is connected, has to be dead (power / voltage off ). Touching live
(voltage or power) components is dangerous! Therefore, the appropria-
te fuses are to remove and secure. No body shall be able to turn voltage
/ power on without prior notification. Before opening / disconnect the
clamps, short-circuit the secondary circuits of the current transformers.
The resulting high voltage on the current transformer is extremely dan-
gerous (dangerous to life) and could destroy the current transformer.
The usual local security and work rules must be observed. The installati-
on of the meter must be carried out by qualified and trained personnel.
NOTE
Der multicount D5-xxx-MID is maintenance free. In case of damage
(for example shipping, incorrect connection or storage) repairs may
only be done by KBR GmbH.
8

Product liability

You have purchased a high-quality product.
Only components of the highest quality and maximum reliability are
used.
Each device is subject to long-term testing before delivery.
For details on product liability, please refer to our general terms and
conditions for electronic equipment.
The assured device properties only apply if the device has been opera-
ted in accordance with its intended use!

DISPOSAL

Devices that are faulty, obsolete or no longer used must be properly
disposed of.
If required, we will dispose of the device for you.
9