Fastcorp DIVI Setup And User Manual page 38

BOOT LOADER UPGRADE: To be installed prior to major program revisions. (From Program Revision Prior to 119K)
Turn the Power Supply power switch "ON".
Use the asterisk "*" key to scroll through the contents of the Micro SD card. There may be more than one program
version contained on the card. Use the "*" key to scroll to the latest or highest number version of the boot loader.
The boot loader version will be displayed in the "BOOTVxxx.bi2" format, where "xxx" is the numeric
revision number. For example, BOOTV238.bi2.
Press the pound "#" key. The Display will read:

PROGRAMMING

BootVxxx.bi2
An LED status light on the right side of the board will start flashing rapidly. When the process is complete,
the display will read:

Update success.

Remove card.....
Press down gently on the top of the card and let go. The card will slide up slightly in the sleeve. Leave the Micro
SD card in the slot. The Display will read:
PROGRAM REVISION UPGRADE: (From Program Revision Prior to 119K)
Fastcorp, LLC
DIVI Setup and Users Guide

BOOT UPDATE xxx

Done!

The Display will change to read:

BOOT LOAD xxx

Out of Service
Page 38 of 62
Rev 6