Fastcorp DIVI Setup And User Manual page 31

G. AUTO VENDS –
Used internally to cycle-vend machines under test. Machine will automatically cycle through all
programmed selection numbers repeatedly at 3 minute intervals until option is turned off. After
Auto Vends is enabled, pull Service Switch "out". Push the Service Switch "in" to stop. Go back to
8) Auto Vends and follow instructions to turn Auto Vends "OFF".
Display
8) AUTO VENDS
* = Next D = Back
AUTO VENDS
*-CHANGE
AUTO VENDS
*-CHANGE
*-EXIT
AUTO TEST IS ON
H. SET SERVICE PHONE #
Enter, update, or view your service phone number. This programmed number will appear on the
display screen in the event that the machine goes out-of-order.
Display
9) SET SERVICE PHONE #
* = Next D = Back
Phone (###) ### - ####
* save ABCD=( ) _ -
Phone (555) 555 - 1234
I. SALES PIN CODE -
View or change the PIN code that will allow access to Sales Meters without opening the door.
While in "Please Insert Money" mode, Press # * and the four numbers you selected.
Display
10) SALES PIN CODE
* = Next D = Back
Sales PIN: #*1234
*-EXIT
SAVED
Fastcorp, LLC
DIVI Setup and Users Guide
a) Press the #=Yes key to enter menu option.
# = Yes
N b) Press *-Change to scroll from "N" to "Y"
#-EXIT
Y c) Auto Vends is "ON". Press # -EXIT menu. Pull out
button on the Interlock/Service Switch to begin cycle.
#-EXIT
#-SAVE
d) Momentary display.
a) Press the #=Yes key to enter Menu Option.
# = Yes
b) Type in service phone number. Use the "ABCD" code
to format your service phone number. A=( ,
# ex
C=SPACE ,
c) Press *save to save your service number and exit.
a) Press the #=Yes key to view or change sales pin code.
# = Yes
b) Sales Pin Code is factory set at #*1234. Use factory
setting or type over four new digits and press the #-Save
key. Type this code when you are in "Please Insert
#-SAVE
Money" mode to gain direct access to Sales Meters.
c) Press # to save the new PIN
Page 31 of 62
Programming Instructions
Programming Instructions
D= -
Programming Instructions
Rev 6
B=) ,