Daedong DSC62 Manual page 58

4-1 DSC62
self-diagnosis warning (when the stoP lamP is flickering)

led sign
Straws or weeds catch on
the sensor.
E•1, E•2
The sensor or electrical
wiring is bad.
The detection of the engine
E•3, E•9
speed is bad.
The detection of the engine
E•4 speed or the No. 2
rotation detection is bad.
The detection of the driving
E•5, E•8
speed is bad.
The neutral or back switch
E•6
is bad.
The detection of No.2 rota-
E•7
tion is bad.
The output of AES solenoid
E•A
is bad.
DSC62-영문판-4장.indd 18
causes troubleshooting
• Stop the automatic feeding
depth control.
• Remove the straws or weeds.
• Check the electrical wiring and
connectors.
• Change the electronic pick up.
• Check the electrical wiring and
connectors.
• Change the electronic pick up.
• Change the No. 2 sensor.
• Check the electrical wiring and
connectors.
• Change the vehicle speed sen-
sor.
• Check the electrical wiring and
connectors.
• Change the sensor.
• Check the electrical wiring and
connectors.
• Change the No. 2 sensor.
• Check the electrical wiring and
connectors.
• Turn the main switch to STOP.
location
417O422A
(1) LED Sign
2012-04-17 오후 4:55:15