Daedong DSC62 Manual
  1. Manuals
  2. Brands
  3. Daedong Manuals
  4. Farm Equipment
  5. DSC62
  6. Manual
Daedong DSC62 Manual

Daedong DSC62 Manual

Combine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
For convenient operation and service, the following symbols are used for the controllers. Please become fa-
miliar with them to learn how to operate and service your machine correctly.
Horn
Indicating the direction of
turn signal lights
The direction combine and
lowering/raising the reaping
unit
Fuel level
Charging Battery
DSC62-영문판-0장.indd 1
SYMBOLS OF THE CONTROLLERS
"Low" engine speed
Head lamp
Engine stop
Coolant temperature
"High" engine speed
Vent lamp and the work
lamp
Flickering to indicate opera-
tion of turn signal lights
Engine oil pressure
2012-04-16 오후 6:34:08

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSC62 and is the answer not in the manual?

Questions and answers

Abdul-muttalib Usman
May 27, 2025

Does DSC62 have anti theft security ?

0
1 comments:
Mr. Anderson
May 27, 2025

The provided information does not mention any anti-theft security features for the Daedong DSC62.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for Daedong DSC62

Summary of Contents for Daedong DSC62

  • Page 1 Indicating the direction of Head lamp turn signal lights lamp The direction combine and Flickering to indicate opera- lowering/raising the reaping Engine stop tion of turn signal lights unit Fuel level Coolant temperature Engine oil pressure Charging Battery DSC62-영문판-0장.indd 1 2012-04-16 오후 6:34:08...
  • Page 2 If the information that you are looking for is not found in this manual, please feel free to contact a DAEDONG dealer. The dealer will be happy to assist you.
  • Page 3 Should this combine be used for other performance or modified, the warranty will become void.  Replace missing or damaged safety labels. Purchase new labels from a near dealer and fix them on the  specified locations. DSC62-영문판-0장.indd 3 2012-04-16 오후 6:34:09...
  • Page 4 3. Operate this machine in an appropriate manner. When this machine is not operational any more, do not abandon it. Rust and oil from the abandoned machine can contaminate soil and ground water. Only contact an authorized disposal company for legal disposal. DSC62-영문판-0장.indd 4 2012-04-16 오후 6:34:09...
  • Page 5 ISO1400:1996, and internal standards. We work hard to meet our environmental goals. To meet the goals, we announce the goals to the public, educate our employees, and periodically assess our progress toward the goals. DSC62-영문판-0장.indd 5 2012-04-16 오후 6:34:09...
  • Page 6 3. Before checking the inside of the threshing unit, you MUST stop the engine. 4. Before checking rotating parts such as chains, belts & etc., you MUST stop the engine. 5. When working as a team, always sound horn before starting the engine or moving the combine to clear people away from the machine. Whenever you use this combine, please follow these five rules. For your safety, in addition to the above rules, please follow other safety alerts and rules suggested in each chapter. DSC62-영문판-0장.indd 6 2012-04-13 오후 5:57:20...

  • Page 7: Table Of Contents

    HOW TO USE METERS, GAUGES AND CONTROLLERS ..... PRE-STARTING CHECKS ..............SECTION HOW TO MOVE, DRIVE AND TRANSPORT THE COMBINE ..HARVESTING INSTRUCTION ............MAINTENANC ................... LONG TERM STORAGE ..............TROUBLESHOOTING ............... ACCESSORIES/LIST OF CONSUMABLES ........INDEX ....................DSC62-영문판-0장.indd 7 2012-04-16 오후 6:34:09...
  • Page 8 7. HARvESTING INSTRUCTION 4. HOW TO USE METERS, GAUGES AND CONTROLLERS WORKING CONDITIONS OF CROP AND PADDY FIELD ..........7-2 USAGE OF SWITCHES AND INSTRUMENT PANEL ........4-2 PREPARATION BEFORE REAPING ....7-3 CONTROLLERS ..........4-7 COMBINE HARVESTING ........7-6 DSC62-영문판-0장.indd 8 2012-04-16 오후 6:34:09...
  • Page 9 LONG TERM STORAGE ........9-2 SEPERATION PERFORMANCE IS POOR ..10-9 10. TROUBLESHOOTING 11.ACCESSORIES/LIST OF CONSUMABLES THE BUzzER SOUNDS BEEP-BEEP ACCESSORIES ..........11-2 INTERMITTENTLY ........10-2 LIST OF CONSUMABLES ......11-3 THE BUzzER BEEPS AND 12.INDEX THE ENGINE STOPS ........10-3 DSC62-영문판-0장.indd 9 2012-04-16 오후 6:34:10...
  • Page 10 DSC62-영문판-0장.indd 10 2012-04-16 오후 6:34:10...

  • Page 11: Safety Cautions

    1.SAFETY CAUTIONS CHECKING BEFORE OPERATION ........1-2 HOW TO DRIVE THE COMBINE ..........1-4 HARVESTING INSTRUCTION ..........1-8 THE COMPLETION OF THE OPERATION AND THE STORAGE ................ 1-9 LOCATIONS OF SAFETY-ALERT LABELS ......1-13 DSC62-영문판-1장.indd 1 2012-04-17 오전 10:20:18...

  • Page 12: Checking Before Operation

    1-2 DSC62 CHECKING BEFORE OP- ERATION WARNING WARNING • The following should never be allowed to operate this combine. 1. Those under the influence of al- cohol 2. Those under 16 3. Inexperienced operators 4. Those who are over-fatigue, sick or under the influence of medicine; the others who are not qualified for certain reasons.
  • Page 13 • Make sure that the safety sys- tems like turn signal lights are properly working. • never modify this combine. DSC62-영문판-1장.indd 3 2012-04-17 오전 10:20:19...

  • Page 14: How To Drive The Combine

    1-4 DSC62 HOW TO DRIVE THE COM- BINE 417O105A 417O106A 417O107B • • • tighten up all the fuel inlets Dispose any used oil only in a Before checking and clean- and stand safety fences. properly equipped authorized ing, be sure to power off the •...
  • Page 15 [mid speed (the proper position: 2000 rpm)] position. • D o n ’ t s t a r t , b r a k e o r t u r n abruptly. DSC62-영문판-1장.indd 5 2012-04-17 오전 10:20:19...
  • Page 16 1-6 DSC62 417O110A 417O111A 417O123A • • • follow the traffic rules when remain at a low speed when When stopping or parking on a driving on a road. driving on a narrow rural or flat ground, apply the parking •...

  • Page 17: Safety Cautions

    • ensure the ramps are straight- ly lined up with the cargo bed of the transporting vehicle and the hooks on the ramps are securely engaged. DSC62-영문판-1장.indd 7 2012-04-17 오전 10:20:19...

  • Page 18: Harvesting Instruction

    1-8 DSC62 HARVESTING INSTRUCTION 417O114A 417O115A 417O116A • • • When entering into a field, When driving, don’t let other Don’t operate the combine on drive down slowly and verti- people, especially children, a steep slope. • cally from a field bank.

  • Page 19: The Completion Of The Operation

    • Clean the surrounding areas of the engine, battery and fuel tank. • Do not touch the exhaust sys- tem or radiator until they cool down. DSC62-영문판-1장.indd 9 2012-04-17 오전 10:20:19...
  • Page 20 1-10 DSC62 CAUTION WARNING • When disconnecting the battery cables, always dis- connect the battery ground (-) cable first from the bat- tery. When connect the ca- bles, connect the (+) cable first. 417O120A 417O119A • C l e a n t h e e x t e r i o r w i t h •...
  • Page 21 Do not lay the fire extinguisher flat or use it in an inverted position. DSC62-영문판-1장.indd 11 2012-04-17 오전 10:20:20...
  • Page 22 1-12 DSC62 WHEN THE COMBINE HARVEST- ER IS BEING USED BY OTHERS. The operation method of the ■ harvester and safety notes must be explained in detail to the user. The user must read the user guide carefully in or- der to operate the harvester safely.

  • Page 23: Locations Of Safety-Alert Labels

    SAfety CAutIOnS In OperAtIOn 1-13 LOCATIONS OF SAFETY-ALERT LABELS 40 41 417O121B-5 DSC62-영문판-1장.indd 13 2012-04-17 오전 10:20:20...
  • Page 24 1-14 DSC62 1. Label C7323-79232 3. Label C7321-43292 It must be folded when trans- WARNING ported on the road, otherwise CAUTION incident may occur. 4. Label C7313-62181 under this cover, there is a spinning part that can cause serious injuries.
  • Page 25 Remove any open flame. • Smoke and flame are strictly forbidden around the fuel tank. • the engine must be shut off before adding fuel. • please wipe any spilled diesel with dry cloth. DSC62-영문판-1장.indd 15 2012-04-17 오전 10:20:21...
  • Page 26 (Make sure to install the grinding face of the cutting blade toward the direction of the head of crops) Operating lever 2. please use Daedong 170 cutting blade (57781-5261-2) 12.Label C7343-53122 13.Label C7343-51642 WARNING WARNING No man standing behind shredder 1.
  • Page 27 3. When at work, the operating assistant should use backrest and hold the handle of the hopper to avoid falling and injuries. DSC62-영문판-1장.indd 17 2012-04-17 오전 10:20:22...
  • Page 28 1-18 DSC62 19.Label C7331-64221 20.Label C7313-5357 CAUTION CAUTION When installing the chaff container, the rubber plate must be installed as speci- 按照图示位置安装振动筛总成调整橡胶挡板，否则容易磨损。 fied in the following figure. Otherwise, the container will easily be damaged. 1. After assembling the chaff never open the water tank cover ●...
  • Page 29 “off” position and pull it out. each clutch must be placed at the position of [Disengage] and the petal of the stop brake must be secured. Besides, when parking at a slope, anti-slippery measures such as putting wooden stopper must be taken. DSC62-영문판-1장.indd 19 2012-04-17 오전 10:20:23...
  • Page 30 1-20 DSC62 24.Label C7111-81121 28.Label C7111-81181 30.Label C7131-83131 CAUTION WARNING WARNING 1. the engine must be shut off prior to main- At operation in the field, do not tenance, cleaning or troubleshooting. . reap by putting the auxiliary shift 2. Do not operate auxiliary shift to change lever on the “move”...
  • Page 31 4. the cover must be installed after C7131-83171 4.在检修、清扫完成后，必须将盖 compartment cover is opened. 及皮带相接触，会造成伤害事故。 maintenance and cleaning are com- 板装好。 therefore, the engine must be shut off pleted. C7131-83121 所以在打开发动机室盖时，必须将 before opening the compartment cover. 发动机停止。 C7313-53562 DSC62-영문판-1장.indd 21 2012-04-17 오전 10:20:23...
  • Page 32 1-22 DSC62 39.Label C7111-81161 42.Label C7131-83151 46.Label C7121-82131 CAUTION CAUTION CAUTION 注 意 注 意 注 意 the negative lead wire must be 左 1.如图所示机器后视镜的位置。 取下电瓶时，必须先拆下负极线。 右 1.the position of the removed first when taking off the 视 视 镜...
  • Page 33 机器起动后，禁止打开外部盖板。 cover. 2.机器工作时，外部有高速转动的 2. When the machine is at work, there is com- 部件，接触会造成伤害事故，手 ponent rotating at high speed outside. Any contact may cause injuries, so do not put your 不能靠近。 hand close. C7131-83191 DSC62-영문판-1장.indd 23 2012-04-17 오전 10:20:24...
  • Page 34 MeMO MEMO DSC62-영문판-1장.indd 24 2012-04-17 오전 10:20:24...

  • Page 35: Service

    2. SERVICE ABOUT SERVICE ..............2-2 DSC62-영문판-2장.indd 1 2012-04-16 오후 6:32:54...

  • Page 36: About Service

    2-2 DSC62 ABOUT SERVICE LABEL STICkIng pOSITIOn And nUmBERIng pRInTIng pOSITIOn Of ThE hARVESTER any authorized dealer in your area and provide the following informa- tion: • Machine model, manufacturing number, manufacturing date, engine model, engine number and situation of failure...

  • Page 37: Specifications

    3..SpecificationS SpecificationS..............3-2 DSC62-영문판-3장.indd 1 2012-04-16 오후 6:33:20...
  • Page 38 Average ground contact pressure (kpa) ≤21.2 Driving Unit Available speeds Hydrostatic transmission (HST) Minimum ground clearance (mm) Low Speed:0~1.0 Forward Driving speed Standard:0~1.5 (m/s) Backward High Speed:0~1.9 Reaping width (mm) 1450 Reaping Unit Reaping rows DSC62-영문판-3장.indd 2 2012-04-16 오후 6:33:20...
  • Page 39 φ 665 x 1397 Separation methods Shaking, blowing and sucking Grain discharge type Gathering grains by hand Grain discharge Hopper type Capacity of hopper (ℓ{1 sack=50ℓ}) 200L (about 4 sacks) Straw Discharge Straw Cutter  Units DSC62-영문판-3장.indd 3 2012-04-16 오후 6:33:20...
  • Page 40 * Changes in the following maintenance schedule can be made without any notice to the owner. ○ Indicates that this harvester is equipped with this device. DSC62-영문판-3장.indd 4 2012-04-16 오후 6:33:21...

  • Page 41: How To Use Meters, Gauges And Controllers

    4. how to Use meters, gaUges and controllers Usage of switches and instrUment Panel .... 4-2 controllers ..............4-7 Usage of the aUtomatic controllers ....4-14 DSC62-영문판-4장.indd 1 2012-04-17 오후 4:54:47...

  • Page 42: Usage Of Switches And Instrument Panel

    4-2 DSC62 Usage of switches and instrUment Panel (1) Main Switch (2) Switch Ass’y (3) Horn Button (4) Combine Status Panel (5) Service Alert Lamps (6) Level Indicating Lamps (7) Engine shut-off knob E32O403B DSC62-영문판-4장.indd 2 2012-04-17 오후 4:54:48...
  • Page 43 2. After completing the turn, set should be engaged in off knob is bounced off. the switch at the center position. the “STOP” position. DSC62-영문판-4장.indd 3 2012-04-17 오후 4:54:51...
  • Page 44 4-4 DSC62 horn bUtton combine statUs Panel engine tachometer It indicates the engine’s speed in revolutions per minute. fUel gaUge If the main switch is at ON, it shows the amount of fuel in the tank. If it is placed on other posi- tions than ON, the indicator of the gauge will be below E.
  • Page 45 This charge lamp indicates any It flashes when the first outlet is malfunctions in the charge system clogged. The horn is beeping. during the engine’s running. no. 2 alert lamP (c) When the main switch is turned to It flashes when the second outlet “ON,” this lamp comes on. When is clogged. The horn is beeping. the engine starts, it goes off. DSC62-영문판-4장.indd 5 2012-04-17 오후 4:54:55...
  • Page 46 4- DSC62 level indicating lamPs oil-water sePartion warn- self-diagnosis alarm lamP (b) ing lamP This lamp is on when the micro If water goes into the fuel filter, computer detects any malfunc- this warning lamp comes on. If it tions among the automated sys- happens, take out the lamp sensor tems.

  • Page 47: Controllers

    HOW TO USE METERS, GAUGES AND CONTROLLERS 4-7 controllers (1) Aux. Shift Lever (2) Main Shift Lever (3) Accelerator Lever (4) Threshing Clutch Lever (5) Reaping Clutch Lever (6) Power Steering Lever (7) Parking Brake (8) Driver’s Seat 417O408A DSC62-영문판-4장.indd 7 2012-04-17 오후 4:54:56...
  • Page 48 4- DSC62 main shift lever aUxiliarY shift lever caUtion • firstly, place the main shift l e v e r a t t h e p o s i t i o n o f “stop”, and then conduct the shifting of auxiliary shift lever.
  • Page 49 You can change the Slow same time. moving direction completely or Fast slightly to the left or right. 1. Tilting the lever back or forth • Slight turn- tilt it slightly to the raises or lowers the reaping desired direction unit. • Complete turn-tilt it completely to the desired direction. DSC62-영문판-4장.indd 9 2012-04-17 오후 4:55:00...
  • Page 50 4-10 DSC62 Parking brake threshing clUtch lever 3. Diagonally tilting the lever al- lows you to control the reaping unit’s height and change the moving direction of the combine simultaneously. 417O414A 417O415A (1) Parking Brake Lever (1) Threshing Clutch Lever (2) Parking Brake Pedal (A) Engage (B) Disengage (3) Arrester (A) Depress Firmly depress the parking brake This lever is to engage/disengage pedal to engage it into the ar- the threshing unit.
  • Page 51 Engage The reaping unit justment lever. operates. 1. When the separation is bad or Disengage The reaping unit grains with ear stems are found, stops. place the debris treatment lever to direction “D”. 2. When grain loss or crushed grains are considerable, the debris treat- ment adjustment lever should be placed to the direction “A” DSC62-영문판-4장.indd 11 2012-04-17 오후 4:55:04...
  • Page 52 4-12 DSC62 lever for droPPer and fan Power adjUstment cUtter shifting method caUtion • when treating the debris, please idle run the thresh- ing unit for 0 seconds. 417O417A E32O404A (1) Lever for dropper and cutter shifting (1) Fan adjustment lever (A) Weak (A) Cutter (B) Dropper (B) Standard (C) Strong You can switch between the cutter Please refer to “Location and and dropper with this lever.
  • Page 53 • nozzle adjustment lever should be operated under the “engage” state of threshing clutch. never operate when the threshing unit is shut off. DSC62-영문판-4장.indd 13 2012-04-17 오후 4:55:06...

  • Page 54: Usage Of The Automatic

    4-14 DSC62 Usage of the aUto- matic controllers driver’s seat Working state Adjustment method When there is rela- tively large load on the threshing bar- Open rel for harvesting lodged crops Routine work Standard When the crops are scattered and there Close are many crushed grains 417O419B 417O420A Adjust the position of lever accord- ing to working condition. (A) HIGH (B) LOW (1) Automatic Feeding Depth Controller (C) Backward (D) Forward 1. When adjusting the up/down Ref to the page 4-19. position of the seat, remove the securing pin first.
  • Page 55 When started when there is load on the the emergency shut-off switch is switching cover. pressed and the engine is shut off, E32O701A please turn the start key to the po- (1) Alarm switch for straw discharge sition of “stop” and restart it. The straw discharge alarm switch is on; alarm sounds continuously and the engine is shut off. DSC62-영문판-4장.indd 15 2012-04-17 오후 4:55:13...
  • Page 56 4-1 DSC62 alarm light device how to read the load gaUge The load gauge displays the load of the threshing unit by number. The larger the number, the greater the load. 1. Select the speed based on the load gauge. Please select the appropriate speed according to the load gauge. load lamp • 417O421B step suitable shift horn (1) Grain Lamp (2) Straw Discharge Alarm Lamp Acceleration (3) No. 2 Auger Blockage Alarm Lamp is possible...
  • Page 57 No.1 auger is clogged Stop the engine and remove the clogged straws.  Whether the coolant is sufficient or there is leakage  Coolant temperature The coolant tempera- Whether the fan belt is loosened and needs tightening  Beep – lamp ture is too high Check if dry straws or dust cover the dust screen,  radiator or oil tank. Cleaning is needed. Weeds or straws catch on the sensor when Self-diagnosis Alarm Beep – the automatic feeding Remove the straws or weeds.  Lamp depth control is oper- ating. DSC62-영문판-4장.indd 17 2012-04-17 오후 4:55:14...
  • Page 58 4-1 DSC62 self-diagnosis warning (when the stoP lamP is flickering)  led sign causes troubleshooting location • Stop the automatic feeding Straws or weeds catch on depth control. the sensor. E•1, E•2 • Remove the straws or weeds. The sensor or electrical • Check the electrical wiring and wiring is bad. connectors. • Change the electronic pick up. The detection of the engine E•3, E•9 • Check the electrical wiring and speed is bad. connectors.
  • Page 59 3. By adopting the two grain sen- pressed once and sors, it stably controls the depth. fixed, the automatic selection indicting 4. The feeding depth selection lamp comes on and switch can adjust the depth. feeding depth control This can let the operator set up will be automatically the best feeding depth. performed. DSC62-영문판-4장.indd 19 2012-04-17 오후 4:55:16...
  • Page 60 4-20 DSC62 4. If the manual feeding depth control is turned on when the automatic control system is al- ready performing, the automatic control is superseded by the manual control and the auto- matic mode indicator goes off. 417O428A 417O426A (1) Manual Control Switch (1) Conveyer Belt (2) Plant Sensor (A) Shallow (B) Deep manUal control switch...
  • Page 61 3. If the lever is pushed toward at the lower portion of the har- “SHALLOW”, feeding depth re- vester gearbox. Place the safety mains shallow. lock by the side of the oil cylin- der to ensure that the oil cylin- der is in a locked position. DSC62-영문판-4장.indd 21 2012-04-17 오후 4:55:18...
  • Page 62 4-22 DSC62 417O431A 417O432A (1) Hydraulic steering (5) Latch pin (1) Latch pin shaft (6) Oil cylinder (2) Locking pin and capped pin. (2) Locking pin (A) Lift up (A) Release (3) Capped pin (4) Harvester gear box remaval of latch Pin Operate in reverse order to pre- 3. Apply the capped pin and lock- vent the header from lowering ing pin that have been removed in the positions shown in the diagram below.

  • Page 63: Pre-Starting Checks

    5. Pre-starting checks daily check ................. 5-2 DSC62-영문판-5장.indd 1 2012-04-17 오후 5:35:22...

  • Page 64: Daily Check

    5-2 DSC62 daily check Be sure to perform the following. <check point> <troubleshooting> Engine oil If the oil level is between In c a se o f sh o rt su p - caUtiOn   t h e u p p e r a n d l o w e r ply, refill with oil of the •...
  • Page 65 Chain, Crawler Is there any looseness Adjust to normal.   or damage? Belt cover and muffler Is there any straw de- Remove it.   bris? DSC62-영문판-5장.indd 3 2012-04-17 오후 5:35:22...
  • Page 66 5- DSC62 checking fUel check engine Oil and cOOlant 417O501A 417O502A 417O503A (1) Refuel (2) Fuel Gauge (1) Aux. Coolant Tank (1) Oil Gauge checking dUst screen, radiatOr fin and Oil cOOler fin E32O501A 417O505A 417O506A (1) Dust Screen (1) Radiator Fin (1) Oil Cooler Fin DSC62-영문판-5장.indd 4...
  • Page 67 417O510A 417O508A B55O507B (1) Straw Debris in the Belt Cover (1) Charge Lamp (2) Oil Lamp Air cleaner cleaning mUffler and exhaUst gas PiPe 417O509A B55O508A (1) Muffler and Exhaust Gas Pipe Air cleaner DSC62-영문판-5장.indd 5 2012-04-17 오후 5:35:27...
  • Page 68 MEMO memO DSC62-영문판-5장.indd 6 2012-04-17 오후 5:35:27...

  • Page 69: How To Move, Drive And Transport The Combine

    6. HOw TO MOvE, DRIvE AND TRANSPORT THE COMBINE STARTING AND STOPPING THE ENGINE ......6-2 DRIvING ON ROADS .............. 6-3 HOw TO STOP AND PARk ............. 6-6 LOADING /UNLOADING THE COMBINE ......6-7 DSC62-영문판-6장.indd 1 2012-04-16 오후 7:49:57...

  • Page 70: Starting And Stopping The Engine

    6-2 DSC62 STARTING AND STOPPING THE ENGINE CAUTION • Start the engine only at the driver’s seat. • After warning bystanders, start the engine. • Disengage all clutches be- fore starting the engine. • Unless the main shift lever is engaged in STOP, the en-...

  • Page 71: Driving On Roads

    OFF and take out the key. (Only hole and turn the key to START. turning the key to OFF will shut off If the engine’s temperature is the engine.) below-5ºC, turn the key to PRE- HEAT and wait 10-30 seconds. When the key switch can not  stop the engine, the engine can 3. When the engine starts, release be forced to shut off by pulling the key. 417O605A out the engine shut-off knob. DSC62-영문판-6장.indd 3 2012-04-16 오후 7:49:58...
  • Page 72 6- DSC62 417O606A 417O607A 417O608A (1) Side Deck (1) Left Foothold (A) Fold up (1) Power Steering Lever (2) Left Dividing Pipe (B) Push in (A) Hitch (B) Fix DRIvING 2. Push in the left foothold and fold 3. Test the rear-view mirrors, turn signal lights, horn, and head- 1. Fold up the side deck. up the left dividing pipe. lamps. 4. Disengage the reaping and threshing clutches and put the main shift lever into STOP.
  • Page 73 9. Slowly push the main shift lever 7. Depress the parking brake ped- to FORWARD to move forward. al to release the brake. If you pull the lever to BACK- WARD, the combine will back- ward. Main shift lever Aux. shift lever   A Forward D Low Speed B Stop E Neutral C Backward F Standard G High Speed DSC62-영문판-6장.indd 5 2012-04-16 오후 7:49:59...

  • Page 74: How To Stop And Park

    6-6 DSC62 HOw TO STOP AND PARk HOw TO PARk HOw TO USE THE PARkING CAUTION BRAkE • Stop the combine on a flat To lock and safe place. Then lower F i r m l y d e p r e s s t h e p a r k i n g ...

  • Page 75: Loading /Unloading The Combine

    If do so, the combine may change its direc- tion abruptly and fall down. 417O615A (1) Rope Hooks . D o not a llow people t o ap - ( 2 front and 2 rear hooks) proach near the combine. DSC62-영문판-6장.indd 7 2012-04-16 오후 7:50:00...
  • Page 76 6- DSC62 Then, slowly shift the main shift lever. 5. A l i g n t h e c r a w l e r s w i t h t h e ramps. 417O616A (1) Straw Conveyer Cover (2) Left Dividing Pipe 1. Fold up the left dividing pipe and straw conveyer cover near the straw cutter. 2. Fold up the side deck. 3. Raise up the combine reaping unit completely.

  • Page 77: Harvesting Instruction

    7. HARVESTING INSTRUCTION WORKING CONDITIONS OF CROP AND PADDY FIELD ..7-2 PREPARATION BEFORE REAPING ........7-3 COMBINE HARVESTING ............7-6 DSC62-영문판-7장.indd 1 2012-04-17 오후 4:56:08...

  • Page 78: Working Conditions Of Crop And Paddy Field

    7-2 DSC62 WORKING CONDITIONS OF CROP AND PADDY FIELD CROP CONDITION 417O701A 417O702A 417O703A (1) Ear of Crop (A) Lodged angle of crop (B) Standing angle of crop from the ground 1. Crop length (A) 2. Lodging of crop 3. Crop wetness……Should be dry. 650～1300mm Length Lodged outside……Within 85° (No wet feeling when touching crop with hand.) Lodged inside………Within 70° CAUTION Wheat………………Within 45° • Sometimes conditions of a field or crop do not allow the combine to work prop- erly.

  • Page 79: Preparation Before Reaping

    15 higher, it cannot work. rice with a sickle on the four cor- ners of the field for the combine’s turning space. CAUTION • If a field is weedy, the com- bine may not reap. Remove the weeds first. DSC62-영문판-7장.indd 3 2012-04-17 오후 4:56:11...
  • Page 80 7- DSC62 PREPARATION BEFORE OPERATION AIR VOLUME ADjUSTMENT LEVER 417O707A 417O708A E32O404A (1) Dividing Pipe (A) Open (1) Straw Discharge Selection Lever (1) Fan adjustment lever (A) Weak (A) Cutter (B) Dropper (B) Standard (C) Strong LEFT DIVIDING PIPE SELECTION OF STRAW DIS- The status of the adjusting lever CHAGE METHOD shall be standard. Take out the left dividing pipe. You can select the cutter or drop- per with this lever. To switch the...
  • Page 81 • If the left dividing pipe or straw conveyer cover is not CAUTION open, the systems may be • During operating the cutter clogged with straws. or dropper, this back cover should remain open. DSC62-영문판-7장.indd 5 2012-04-17 오후 4:56:18...

  • Page 82: Combine Harvesting

    7-6 DSC62 COMBINE HARVESTING CAUTION 1. Do not let bystanders be around the combine 2. Sound horn to warn by- standers before turn the en- gine or engaging any clutch and check their safety. 3. While the engine is run-...
  • Page 83 3. If you reap long rice or wheat, or Remove the buildup fre- a plenty of weeds are present, quently. adjust the cutting height slightly higher. DSC62-영문판-7장.indd 7 2012-04-17 오후 4:56:19...
  • Page 84 7- DSC62 Crop conditions Shift lever position Separable condi- Elevating speed Angles Aux. shift lever tions shift lever Hard to separate Standing up Standard Easy to separate Mid • Low Lodged angle 45° High or higher 417O714A (1) Elevating Speed Shift Lever (A) High speed (B) Low speed (C) Mid speed ADjUSTING ELEVATING SPEED Adjust the elevating speed shift and auxiliary shift levers as follow- ing based upon the crop and field conditions.
  • Page 85 CAUTION arate. There are 4 different rake heights. • The cutter blade should be 2. Adjust the elevator rake height set on the standard position to the higher position when har- to prevent clogging with vesting tall or lodged crop. soil on a wet-land or near a ditch. DSC62-영문판-7장.indd 9 2012-04-17 오후 4:56:21...
  • Page 86 7-10 DSC62 CAUTION • When feeding straws are scattered too much, set the guide at the standard posi- tion. 417O717A 417O718A (1) Elevator Rake Cover (1) Elevator Rake Guide (Right) - Standard (2) Bolt Position (2) Nut 3. To remove the elevator rake E L E V A T O R R A K E G U I D E...
  • Page 87 Please adjust the treatment lever accelerator lever on the rabbit- arrowed green zone. as described in the following table. symbol position. CAUTION 2. Engage the threshing clutch and rotate the threshing rotor. • Please adjust the engine speed while the combine stops and the threshing clutch lever is engaged. DSC62-영문판-7장.indd 11 2012-04-17 오후 4:56:23...
  • Page 88 7-12 DSC62 CAUTION Working conditions Adjustment • Cutting lodged crop Before controlling chaff, Open Being overloaded please idle the threshing unit for 30 seconds. Normal working Standard Considerable grain loss Close Considerable brokenears 417O722A (1) Chaff Control Lever (A) OPEN “A” (B) CLOSE “B” ADjUSTMENT OF THE CHAFF CONTROL Control chaff with the chaff control lever located between the hopper and straw cutter. 1. W h e n s e p a r a t i o n i s b a d o r...
  • Page 89 ADjUSTING SIEVE CASE SUP- shown in the above figure. PORT 1. Remove the left side cover and open the cleaning cover of the No.1 screw auger. 2. Open the control window. 3. Remove the sieve bolts (4 ea.) and adjust the sieve case sup- port. DSC62-영문판-7장.indd 13 2012-04-17 오후 4:56:25...
  • Page 90 7-1 DSC62 HOW TO OPERATE THE DRIVING UNITS 2. Engage the reaping clutch and push the main shift lever into FORWARD.…………The reaping parts are rotating. 417O729A 417O730A (1) Threshing Cutch Lever (1) Main Shift Lever (2) Aux. Shift Lever (2) Reaping Clutch Lever (A) Engage ADjUST THE DRIVING SPEED ROTATING PARTS 1. Depending upon crop and field 1. Engage the threshing clutch.
  • Page 91 USUAL HARVEST IN A ROTA- DIVIDING A FIELD INTO TWO TIONAL PATTERN SECTIONS Align the right divider with the last 1. Set the right divider toward the swathed crop stump. slightly outside of the fourth crop row. CAUTION • To align the combine with the crow rows, gently tilt the power steering lever. DSC62-영문판-7장.indd 15 2012-04-17 오후 4:56:28...
  • Page 92 7-16 DSC62 REAPING METHODS TURNING IN A FIELD 417O733A 417O734A 417O735A (1) Field Bank (2) Reaping in the Counterclockwise Direction (3) Pre-cut Corners of the Field 1. After reaping in a one direction, 3. Back up the combine while tilt- A NORMAL FIELD slowly raise up the reaping unit ing the steering lever to the right 1. To reap the crop right inside of while moving forward. (Don’t end. Then, align the combine...
  • Page 93 (2) Right Inside of the Bank 2. You may reap the crop while you A RECTANGULAR FIELD are slightly turning as shown in After reaping the two diagnal ends the above figure. of the field to turn around, horizon- tally divide the field into two reap- ing sections. This gives you more efficiency. DSC62-영문판-7장.indd 17 2012-04-17 오후 4:56:31...
  • Page 94 7-1 DSC62 TIPS FOR HARVESTING THRESHING CROPS AT THE CORNERS OF A FIELD CAUTION 1. While working in a wet field, unload grains from the com- bine after each reaping trip and a complete turn. 2. When the grain tanks are...
  • Page 95 If the shutter un- 5. When the shredded straws plants from a corner of a expectedly shut down, you clog the cutter outlet, shut field. will get injured. off the engine before remov- ing the straws. DSC62-영문판-7장.indd 19 2012-04-17 오후 4:56:36...
  • Page 96 7-20 DSC62 417O743A 417O744A 417O745A (1) Grain Lamp (1) Threshing Clutch Lever (1) Shutter (A) Disengage (A) Push (B) Pull 2. When the hopper and grain 3. When a alert sound, immediate- 4. After pushing the shutter to the ar- sacks are full, all grain lamps on ly stop reaping and discharge rowed direction, take out the filled the service alert panel will flicker grains in the hopper. grain sacks below the hopper. and a horn will be blown. 5. Then, hang new sacks on the...
  • Page 97 1. Open the cutter conveyer cover 1. Place the lever to the position of first and leave it open. DROPPER. AT CUTTER WORKING 1. Place the change lever to the position of "cutter" Ensure that the change lever is placed to the position of "dropper" after the harvesting. DSC62-영문판-7장.indd 21 2012-04-17 오후 4:56:39...
  • Page 98 MEMO MEMO DSC62-영문판-7장.indd 22 2012-04-17 오후 4:56:40...

  • Page 99: Maintenanc

    ....... 8-19 Straw cutter ..............8-21 cleaning up the inSide ..........8-23 repleniShing each part with greaSe ....8-28 periOdical lubricating pOintS ........ 8-30 rOutine inSpectiOnS and adjuStMentS ....8-33 periOdical replacMent ..........8-47 DSC62-영문판-8장.indd 1 2012-04-17 오후 5:35:59...

  • Page 100: Maintenance Schedule Table

    8-2 DSC62 Maintenance Schedule table 1. Routinely service the combine as specified in the following tables cautiOn (marked by or   • if there is any crack or dam- 2. These tables are only general guidelines. If there is an abnormal age on a belt, replace it.
  • Page 101           Transmission Every 50 hr:Check fluid                     Every 300 hr:Change Hydraulic oil DSC62-영문판-8장.indd 3 2012-04-17 오후 5:36:01...
  • Page 102 8-4 DSC62  : Inspect and service (if necessary) after a test drive  : Inspect and Service : Replace (if necessary) after a test drive : Replace Schedule 1000 after item HST oil filter cartridge Every 800 hr:Change     Hydraulic oil cartridge Every 350 hr:Change Driving roller   Cam clutch (Reap- Every 600 hr:Change  ing drive pulley) Supporting wheel, Every 800 hr:Change  Tension wheel Axle, axle cap, Every 1000 hr:Change  oil seal Every 100 hr:Check Track belt, track   ...
  • Page 103              chain Every 400 hr:Change Every 100 hr:Check Cutter           Every 400 hr:Change Track roller of left stem apical chain,  Every 500 hr:Change  follow-up chain wheel DSC62-영문판-8장.indd 5 2012-04-17 오후 5:36:02...
  • Page 104 8-6 DSC62  : Inspect and service (if necessary) after a test drive  : Inspect and Service : Replace (if necessary) after a test drive : Replace Schedule 1000 after item Cutter crank pin roller, bearings,  Every 500 hr:Change  bearing chocks, oil seal Right stem apical chain track roller  Every 500 hr:Change  and follow-up chain wheel Left ear apical chain track roller  Every 500 hr:Change  and bearing follow- up chain wheel Stem apical supply chain roller and bearing, tension  Every 500 hr:Change  chain pulley and bearing Right ear apical chain track roller ...
  • Page 105 Schedule 1000 after item Crop-lifting 65 roller  Every 500 hr:Change  and bearing Star wheel  Every 800 hr:Change  Crop-lifting 65 roller Every 500 hr:Change and bearing Stem apical sensor  Every 500 hr:Change  Left stem apical guide rail, middle stem apical guide rail, architecture Every 800 hr:Change  guide rod of supply unit, supply guide rod, stem apical relaxing Crop-lifting chain pulley, slide rail,  Every 1000 hr:Change shock absorber rub- DSC62-영문판-8장.indd 7 2012-04-17 오후 5:36:02...
  • Page 106 8-8 DSC62  : Inspect and service (if necessary) after a test drive  : Inspect and Service : Replace (if necessary) after a test drive : Replace Schedule 1000 after item Crop-lifting chain pul- ley, slide rail, shock  Every 1000 hr:Change absorber rubber Right ear cover, right  Every 1000 hr:Change ear architecture Crop-lifting guide rail,  Every 1000 hr:Change crop-lifting cover Threshing depth architecture guide  Every 1000 hr:Change Threshing depth Every 800 hr:Change  chain guide rail Grease for each gear Dismounting  Every 100 hr:Check Various drive belt    ...
  • Page 107 Chaff-arranging ear Every 100 hr:Check           apical roller Every 500 hr:Change Cutter      Every 200 hr:Change Chaff-arranging ear Every 150 hr:Change       apical conveying Arch-shaped gear Every 300 hr:Change    DSC62-영문판-8장.indd 9 2012-04-17 오후 5:36:03...
  • Page 108 8-10 DSC62  : Inspect and service (if necessary) after a test drive  : Inspect and Service : Replace (if necessary) after a test drive : Replace Schedule 1000 after item Every 200 hr:Check Sieve      Every 400 hr:Change Conveying auger 1  Every 1000 hr:Change Dispose knife (im-  Every 500 hr:Change  peller, dead knife) 2 Conveying auger 2, vertical conveying  Every 1000 hr:Change auger 2, steer lining 2 Front sealing cover Every 400 hr:Change   Vertical conveying Every 400 hr:Change   auger...
  • Page 109     Every 400 hr:Change Screw nut tightening of supply shaft and Every200 hr:Check           cutter shaft Every100 hr:Check Chaff-arranging             conversion cable Every 500 hr:Change DSC62-영문판-8장.indd 11 2012-04-17 오후 5:36:04...

  • Page 110: Oil And Coolant Change Schedule

    8-12 DSC62 Oil and cOOlant change Schedule table fOr changing Of Oil/cOOlant  : Check ,  : Replenish , : Change Schedule every page items time hour hour hour hour hour hour hour hour hour hour hour Fuel  In the winter, drain the radiator or refill a 50/50 mixture of anti- Engine Unit Coolant 8-36  freezing engine coolant and pure water for a long term parking.
  • Page 111 Oil SpecificatiOn and capacity item Specification capacity Fuel Fuel for the diesel engine 49ℓ Radiator 8.1ℓ Coolant (Anti-freezer) Aux. water tank 0.8ℓ 15°C or higher 30 or 15W-40 for the diesel engine oil Engine oil 8.0ℓ Below 15°C 15W-40 for the diesel engine oil Transmission oil Daedong TF65 10ℓ Daedong TF55 or Shell: DoNAX TD Exxonmobil: Mobil fluid 423 or 424 Hydrostatic Transmission Oil 22ℓ Caltex: TDH fluid KBT Castrol: Castrol Agri TFD Chain Drive Case Oil Gear Oil # 90, #80 or Daedong TF55 0.3ℓ Reaping unit Grease Standard Grease As reguired Threshing unit DSC62-영문판-8장.indd 13 2012-04-17 오후 5:36:04...

  • Page 112: Opening & Closing Of Each Equipment

    8-14 DSC62 Opening & clOSing Of Opening the engine each equipMent rOOM cautiOn 1. convenient maintenance is possible by easy attachment and detachment of the reaping unit and complete opening of the engine cover, threshing and cutter compartments. 2. before access to any part, shut off the engine.
  • Page 113 Securing MethOd sieve, open this cover. ing cOMpartMent cOVer 1. Pull down the thresting drum 1. When raising up the holding with locking the handle (1). handle, push the opening han- 2. Pull the locking handles (front/ dle upward. rear) down and make sure that the handles arelocked firmly. DSC62-영문판-8장.indd 15 2012-04-17 오후 5:36:07...
  • Page 114 8-16 DSC62 acceSS tO the Straw cutter acceSS tO the Straw cutter cautiOn 1. Open the upper cover 2. • when the holding handle is 2. Detach the left side cover. not secured at the position of “close”, the threshing grating may be changed and cause failure of normal threshing if cutting is con- ducted.
  • Page 115 MAINTENANCE 8-17 DSC 02261 DSC 02256 417O816A 417O815A 417O805A (1) Drive Belt (1) Handle 1 (A) Rotate (1) Prop (A) Insert 3. Remove the driver belt. 4. Pull the Handle 1 and move it 5. Place the prop into the hole. slowly. DSC62-영문판-8장.indd 17 2012-04-17 오후 5:36:09...
  • Page 116 8-18 DSC62 One-tOuch attachMent/de- tachMent Of the cOVerS clOSing the Straw cut- cautiOn ting unit • a cover may unexpectedly 1. Perform the opening steps in fall down during attaching the reverse order. o r d e t a c h i n g a n d c a u s e 2. Ensure that the Handle 1 is se-...

  • Page 117: Remouing And Installing Each Unit

    7. Start the engine and slowly back raise up the reaping unit and set up a little bit. up the reaping unit stand (1). 8. Remove the reaping unit drive 3. Lower the unit and shut off the engine. belt and locking pin. 4. Remove the two reaping unit 9. Remove the connecting head holding pins. pin and back up. 5. Disconnect the unit wire con- nectors. DSC62-영문판-8장.indd 19 2012-04-17 오후 5:36:10...
  • Page 118 8-20 DSC62 SieVe caSe 417O809A 417O810A 417O811A (1) Tension Lever (1) Separator (1) Sieve Case (A) Pull out (2) Oscillator Belt (A) Directions of Teeth (3) Tightening Bolt (4) Fixing Bolt (5) Oscillating Shaft Seal reMOVing the SieVe caSe 3. Rotate the diffuser (suction de- 4. Pull the sieve case out. vice) to adjust the direction of 1. Release the tension lever and saw-tooth according to the dia- remove the oscillator belt.

  • Page 119: Straw Cutter

    1. Lifting and attaching the straw cutter should be done by at 417O812A least 2 or more people. (1) 2 Sieve Case Front Seals (2) 2 1st Flow Plate Seals (The cutter should be placed on (3) 2 2nd Flow Plate Seals the supporting pins on the com- (4) Oscillator Axle Seal bine.) (5) Fuel Tank (6) 2 Side Seals on Each Side DSC62-영문판-8장.indd 21 2012-04-17 오후 5:36:13...
  • Page 120 8-22 DSC62 DSC 02261 417O814A 417O815A 417O816A (1) Dust Proof Rubber (1) Handle 1 (A) Rotate (1) Belt 2. Ensure that the dust proof rub- 3. Rotate the straw cutter and lock 4. Place the belt (SB-55) on its po- ber is located at the bottom of it on to the combine. sition. the cutter. DSC62-영문판-8장.indd 22 2012-04-17 오후 5:36:14...

  • Page 121: Cleaning Up The Inside

    * Remove the cutter in the re- tank and cutter covers. verse order of the installation. 3. when closing a cleaning port, operate its cleaning lever a couple of times to ensure that no grain is left on the port. then, close the port. DSC62-영문판-8장.indd 23 2012-04-17 오후 5:36:15...
  • Page 122 8-24 DSC62 1. Idle the threshing unit for 3 min- cautiOn utes 4. d r y u p t h e i n s i d e o f t h e 2. Open the straw cutter (refer to combine before cleaning up 8-16). the inside. if the inside is 3. Dismantle the vibrating sieve...
  • Page 123 “Off.” 10. Repeat one-minute idling 3~4 times. Then, the remaining grains inside the combine will be removed. 11. Clean up the inside again with compressed air or a blower. DSC62-영문판-8장.indd 25 2012-04-17 오후 5:36:17...
  • Page 124 8-26 DSC62 If you recharge the battery in a cautiOn quick way with a large current, • when it is difficult to start charge the battery again after the the engine or lights are get- intended operation. ting dimmer, charge the bat- tery immediately.
  • Page 125 2. firm contact between the ground cable first. Otherwise you cable sockets and the battery may short the circuit. terminals. 2. When connecting the battery 3. properly operating switches cables, connect the positive (+) cable first. Then, connect the negative (-) cable. DSC62-영문판-8장.indd 27 2012-04-17 오후 5:36:18...

  • Page 126: Replenishing Each Part With Grease

    8-28 DSC62 repleniShing each part with greaSe reaping unit 417O826A DSC62-영문판-8장.indd 28 2012-04-17 오후 5:36:18...
  • Page 127 Reaping Shaft Case 150g case) 100g Cutter Unit Drive Case 100g Cutter Drive Case (RH) Elevator Driver Case 1 100g 150g Elevator Shift Case 50g (Each) Elevator Shift Case 4.5 Elevator Shift Case 8.9 50g (Each) Feeding Case (Right) Depth Case Left Rake Case Depth Drive Case (Motor) Depth driver (installed at No diagram to show 50g or on teeth the engine) cautiOn • when reassembling each part, replenish it with speci- fied grease. DSC62-영문판-8장.indd 29 2012-04-17 오후 5:36:18...

  • Page 128: Periodical Lubricating Points

    8-30 DSC62 periOdical lubricat- greaSe On the One-way Oil in chain driVe caSe ing pOintS cutting clutch Safety ruleS • when adding oil, secure the cuff and do not wear loose jacket, with no hand towel tied around waist or neck to prevent being caught by chains.
  • Page 129 3. Add oil to the locations where c h a i n s c a n n o t b e d i r e c t l y touched. 417O829A 417O830A (1) Plant Side Chain (RH) (1) Plant Side Chain (LH)(  ) (  ) DSC62-영문판-8장.indd 31 2012-04-17 오후 5:36:21...
  • Page 130 8-32 DSC62 417O833A 417O834A 417O835A (1) Plant Conveying Chain (  ) (1) Ear Side Chain (RH) (  ) (1) Feeding Chain 417O837A 417O838A (1) Ear Side Chain (LH) (  ) (1) Straw Discharge Chain DSC62-영문판-8장.indd 32 2012-04-17 오후 5:36:23...

  • Page 131: Routine Inspections And Adjustments

    30 sec- dling the battery. onds. • the reaping unit may fall 3. Dismantle the anti-falling tools down after being raised up and lower the reaping unit. 417O839A for a long time. pay close (1) Reaping Blade (  ) attention to it. DSC62-영문판-8장.indd 33 2012-04-17 오후 5:36:23...
  • Page 132 8-34 DSC62 cleaning air cleaner cleaning air cleaner eleMent cautiOn • the air cleaner should be r e g u l a r l y m a i n t a i n e d t o bring its function into play;...
  • Page 133 Diesel oil 30 1. Open threshing cylinder. 15°C or above or 15W-40 8.0 ℓ 2. Dismantle front side cleaning 15W-40 for Below 15°C port diesel engine 3. Clear up dry leaves. If it is difficult to purchase certified 4. Assemble it according to the se- engine oil, use a CD or better qual- quence reverse to dismantling. ity engine oil. In that case, please use the fol- lowing oils: DSC62-영문판-8장.indd 35 2012-04-17 오후 5:36:26...
  • Page 134 8-36 DSC62 checking the cOOlant checking the tranSMiS- checking the hydraulic in the radiatOr SiOn caSe Oil 417O844A 417O843B 417O845A (1) Oil Filler Cap (3) Drainage Plug (1) Auxiliary Coolant Tank (1) Oil Filler Cap (4) Hydraulic Oil Filter (2) Oil Checking Bolt (A) FULL (B) LOW (2) Oil Checking Bolt (5) Drain Plug (3) Oil Tank Radiator Capacity: 8.1ℓ I f o i l c o m e s o u t w h e n t h e o i l...
  • Page 135 2. keep water away from the again. Regularly clean the dust screen air cleaner. if water goes inside and outside; otherwise it into the air cleaner, the en- Acceptable Deflection 5 ~ 10 mm would be easy to cause engine gine may be damaged. overheating. DSC62-영문판-8장.indd 37 2012-04-17 오후 5:36:29...
  • Page 136 8-38 DSC62 adjuSting the parking adjuSting the pOwer brake cable brake cable 417O849A 417O850A 417O851B (1) Oil Cooler Fins (1) Clearance for Free Moving: 0~5 mm (1) Holding Bracket (2) Parking Brake Cable (2) Power Brake Cable (3) Side Clutch Lever (Right) (4) Holding Bracket (5) Side Clutch Lever (Left) If you want a quick responding Adjust the cable to allow the park- brake to the power steering lever, ing brake to move freely between adjust the brake cable length.
  • Page 137 Spring the rod to have some clearance movement. for free movement. When the clutch is engaged, the spring length is 102 mm. cautiOn • when adjusting or inspect- ing the reaping clutch, set the clutch lever to StOp. DSC62-영문판-8장.indd 39 2012-04-17 오후 5:36:32...
  • Page 138 8-40 DSC62 adjuSting the crawler adjuSting the beltS tenSiOn Adjust each belt’s tension with an adjusting bolt or cable bolt to maintain the proper return spring length as shown in the following table. Specifica- length of belt quantity tion spring 1 Transmission Drive belt REC C46 193mm 2 Threshing Drive Belt C38.5 143mm Engine Unit 3 Reaping Drive Belt TB 53 102mm 4 Threshing Rotor Drive Belt TB 144 286mm 5 Blower Drive Belt TB 66 E32O802A 6 No.1 Drive Belt...
  • Page 139 MAINTENANCE 8-41 threShing rOtOr driVe belt 417O858A (1) LC145 mm (A) 286 mm Straw diScharge chain driVe belt 417O859A (1) LB38 (A) 145 mm DSC62-영문판-8장.indd 41 2012-04-17 오후 5:36:33...
  • Page 140 8-42 DSC62 arOund the engine (1) HST Pulley (2) Reaping Drive Belt LB54 (3) Reaping Pulley (4) Threshing Drive Belt C385 (2 EA.) (5) Engine Pulley (6) Transmission Drive Belt REC B49 (A) 193 mm 417O860A left Side Of the threShing unit (1) LB66 (A) 160 mm (2) Blower (B) 165 mm...
  • Page 141 Or belt chain 417O862A 417O863A 417O864A (1) Nut (2) Conveyor Belt (1) Elevator Chain (1) Elevator Tension Hook (A) Pull (2) Elevator Chain Tension Bolt (2) Bolt (3) Elevator Tension Spring Loosen the mounting bolt of the (A) Adjust the gap to be 0 ~ 2 mm with the tension bolt. master pulley and adjust the belt Gap (A) 0 ~ 2 mm tension. Then, tighten up the bolt. Acceptable Deflection 5 ~ 10 mm DSC62-영문판-8장.indd 43 2012-04-17 오후 5:36:35...
  • Page 142 8-44 DSC62 ear Side feeding chain PLAnt SiDE ChAin (right) (right) cautiOn 1. if the chain is too much loose to adjust its tension, remove the offset link (25.4 mm) from the chain. 2. Set up the left and right el-...
  • Page 143 (25.4 remove the offset link (25.4 mm) from the chain. mm) from the chain. DSC62-영문판-8장.indd 45 2012-04-17 오후 5:36:37...
  • Page 144 8-46 DSC62 adjuSting the feeding Straw diScharge plant depth chain Side chain 417O871A 417O872A 417O873A (1) Depth Chain (3) Fixing Nut (1) Fixing Nut (3) Clearance 1 ~ 2 mm (1) Straw Discharge Plant Side Chain (2) Adjusting Nut (2) Adjusting Bolt (A) Less than 3 mm Extrusion size of Less than Clearance 1~2mm the spacer (A) 3 mm DSC62-영문판-8장.indd 46 2012-04-17 오후 5:36:39...

  • Page 145: Periodical Replacment

    To drain the auxiliary coolant tank, disconnect the overflow hose near the radiator cap. 2. After flushing the radiator, tight- en up the drain plug and fill up the radiator with coolant. Then, refill the auxiliary tank to an ap- propriate level. DSC62-영문판-8장.indd 47 2012-04-17 오후 5:36:40...
  • Page 146 8-48 DSC62 changing the engine Oil anti-freezer Anti-freezer prevents engine cool- cautiOn ant from freezing and damaging 1. add an appropriate amount the engine cylinder block or radia- of anti-freezer to water and tor. let the two mixed well. When it is 0°C or below in the 2.
  • Page 147 Then tighten up and replenish the transmission oil. the oil filler cap too. If the oil comes out through the checking bolt when it is loose, it is the appropriate oil level. Then, tighten the checking bolt (M8). Capacity DAEDONGTF55 ℓ DSC62-영문판-8장.indd 49 2012-04-17 오후 5:36:42...
  • Page 148 8-50 DSC62 changing the hydraulic changing the fuSeS Oil in the Oil tank changing the fuSeS 1. Open the fuse box. 2. remove the fuse. 3. Replace the blown fuse with a new one of the same capacity. cautiOn • if the replaced fuse blows u p i m m e d i a t e l y, d o n o t...
  • Page 149 If the fuse the sensor to drain water. unit. blows, find out the cause. Never 2. After removing the water, con- use any similar fuses to replace it. 2. refuel the fuel tank before it nect the sensor again to the fuel Always use the genuine fuse. becomes empty. filter unit with only hands. Do not use any tool to connect it. Push the priming pump to remove any air in the fuel line. DSC62-영문판-8장.indd 51 2012-04-17 오후 5:36:45...
  • Page 150 8-52 DSC62 periOdical replacMent checking the pipeS Or Of rOller SealS hOSeS 3. When replacing the fuel filter, Safety ruleS insert a sealing between the filter 1. if the fuel hose is damaged, and the filter unit. Then, turn the fuel will leak. replace the filter 2/3 of a turn. hose. Otherwise, it is a fire 4. Lose the air plug.
  • Page 151 Refill engine oil to an injection pump out of dust. appropriate level. Then, run the if dust enters the fuel sys- engine for 5 minutes. Shut off tem, it will cause trouble. the engine again and check the oil level. DSC62-영문판-8장.indd 53 2012-04-17 오후 5:36:46...
  • Page 152 8-54 DSC62 changing the Straw changing the hSt and cutter blade hydraulic Oil filterS 417O888A 417O889A 417O890A (1) HST Oil Filter (1) Oil Filler Cap (4) Hydraulic Oil Filter (1) Drive Belt (3) M10 Bolt (2) 180 Pulley (2) Oil Checking Bolt (5) Drain Plug (3) Oil Tank 1. Remove the drain plug and 1. Remove the drive belt cautiOn drain the oil tank.
  • Page 153 MAINTENANCE 8-55 417O891A 417O892A 417O893A (1) M8 Bolt (1) M8 Bolt (3 EA) (1) Chain 41 (2) Sprocket 12 3. Remove the dust proof plate (2 4. Remove the M8 bolts of the 5. Remove the Sprocket 12, Chain M8 bolts). shaft supporter. (3 from the ear- 41 and Spacer Tube 16 while side and 3 from the plant-side) pulling the shaft supporter down. DSC62-영문판-8장.indd 55 2012-04-17 오후 5:36:49...
  • Page 154 8-56 DSC62 417O894A 417O895A (1) Cutter Shaft Assembly (1) Direction of Rotation (A) Pull forward (2) Direction of Rotation 6. Lower the ear side shaft sup- 7. Put the assembly down on a flat porter and remove the cutter and stable surface. Loose the shaft assembly. hex nuts. 8. After replacing the cutter blades, install the blades by reversing the previous steps. The direc- tions of the blades and their rotation are shown in the above figure.
  • Page 155 MAINTENANCE 8-57 417O896A cautiOn 1. the space between blades should be 848~850 mm. 2. pay close attention not to be in reverse direction of the cutter blades. DSC62-영문판-8장.indd 57 2012-04-17 오후 5:36:52...
  • Page 156 8-58 DSC62 drawing part number part name number 57781-5241-1 Cutting shaft C7340-52421 Shaft handle 1 57666-5223-1 Shaft handle spacer 1 57704-5222-1 Anti-roll drum 57781-5258-1 Support washer 3 57781-5261-2 Cutter blade 170 57781-5245-1 Pipe-58.9 57781-5257-1 Support washer 2 417O897A 57781-5246-1 Anti-roll wheel 2 57781-5256-1 Spring washer 20 (1) M8 Bolt (2) M16 Nut 57781-5247-1 Hex. nut (LH) (A) Left rotation: To narrow the clearance C7340-52481 Shaft handle 2 (B) Right rotation: To widen the clearance DSC62-영문판-8장.indd 58 2012-04-17 오후 5:36:52...
  • Page 157 (left, middle, and right) and ro-  clearance tate the blade unit to raise up its blades vertically. Left rotation: To narrow the  clearance 2. Move the blade unit to the left and remove it from the holding 3. After adjustment, place the bolts pin. and nuts to their original loca- tions. DSC62-영문판-8장.indd 59 2012-04-17 오후 5:36:53...
  • Page 158 8-60 DSC62 aSSeMbling the reaping blade unit 1. Make the blade faced upward and insert the blade unit to the right holding pin, then to the middle and left pins. Move the blade unit to the right. 2. After holding the front of the blade supporter, adjust locations of the right and left blade heads and roller. Then, move the unit...
  • Page 159 417O8A2A (1) Straw Cutting Blade Assembly The straw cutting blade can be (2) Straw Cutting Blade Holder 1 detached from the threshing rotor (3) Bolts and Nuts frame. (4) Straw Cutting Blade Holder 2 (5) Upper Dust Plate (A) Ear Side (B) Plant Side DSC62-영문판-8장.indd 61 2012-04-17 오후 5:36:54...
  • Page 160 8-62 DSC62 threShing Screen diS- Mantling MethOd reMOVing the Straw cutter bladeS 1. The ear side straw cutting blade Open the threshing compart-  ment cover. Loosen the bolts, nuts and  straw cutting blade. 2. The plant side straw cutting blade. Remove the bolts from the  417O902A 417O903A straw cutting blade holder 2.
  • Page 161 1. Set the end of the first auger blade in the middle of the com- bine. 2. Set the flat tip of the vertical au- ger to be parallel to the horizon- tal direction of the combine. 417O8A7A 417O8A8A 3. After installing the auger unit, (1) 1 auger shaft turn the auger once to check its (1) Vertical Auger Shaft (2) End of 1 Discharging Auger Blade (2) Vertical Auger Case free rotation. (3) Flat Tip of Vertical Auger (3) 1 Bevel Case (4) Flar Tip of Vertical Auger (5) End of 1 Discharging Auger Blade (A) Front of the combine DSC62-영문판-8장.indd 63 2012-04-17 오후 5:36:57...
  • Page 162 MEMO MeMO DSC62-영문판-8장.indd 64 2012-04-17 오후 5:36:57...

  • Page 163: Long Term Storage

    9. LONG TERM STORAGE LONG TERM STORAGE ............9-2 DSC62-영문판-9장.indd 1 2012-04-16 오후 6:27:10...

  • Page 164: Long Term Storage

    9-2 DSC62 LONG TERM STORAGE 1. Wash away dirt or mud. Then, 9. Remove the main switch key wipe water out with dry towels. from the combine and keep it well. 2. Remove all weeds or straw de- bris from any rotating parts, cut- 10. T h e b a t t e r y i s s l o w l y d i s - ters, belts, and chains.

  • Page 165: Troubleshooting

    ........10-6 reaping swaThs do noT look good ......10-7 unThreshed ears are discharged ......10-7 grain loss is considerably large ......10-8 no. 2 Thrower is clogged ........... 10-8 seperaTion performance is poor ......10-9 DSC62-영문판-10장.indd 1 2012-04-16 오후 6:26:09...

  • Page 166: The Buzzer Sounds Beep-Beep Intermittently

    Oil cooler Check the au- The auto- Straws or Feeding depth sen- Remove the weeds and straw  tomatic feeding matic feeding weeds are debris depth lamp depth lamp is caught on its flickering sensor DSC62-영문판-10장.indd 2 2012-04-16 오후 6:26:09...

  • Page 167: The Buzzer Beeps And The Engine Stops

    . Open the cover of the threshing cylinder 4. Dismantle by loosening the fastening bolt of the cutter 5. Open the threshing cylinder 6. Dismantle the cutter 7. To dismantle the concave sieve, rotate the upper portion of the threshing cylinder. DSC62-영문판-10장.indd 3 2012-04-16 오후 6:26:09...

  • Page 168: Bulldozing Crops Without Reaping

    Adjust the front ends of the dividers to  teed them to the thresher with roots the same height by hand. Working speed In a lodged paddy field, adjust working  speed for the divider not to touch the roots DSC62-영문판-10장.indd 4 2012-04-16 오후 6:26:09...

  • Page 169: The Engine Does Not Start

    If it is blew out, replace it with a spare fuse (spare  blow fuse blows out fuses are in the fuse box) (be sure to check the Slow blow fuse permitted ampere of the fuse) 417OA01b (1) Fuse Box (2) Slow Blow Fuse DSC62-영문판-10장.indd 5 2012-04-16 오후 6:26:09...

  • Page 170: The Feeding Conveyor Fails To Convey Crops Or Crops Are Unevenly Conveyed

      too wide blades Straw is stuffed between the The gap between cutting Remove the straw   cutting blades blades Cutting blade is worn out Cutting blades Replace the cutting blade   DSC62-영문판-10장.indd 6 2012-04-16 오후 6:26:09...

  • Page 171: Reaping Swaths Do Not Look Good

    The engine speed is too low lever while watching the tachometer Tension spring of the Adjust the spring tension as specified in this  The threshing unit speed is threshing clutch manual too slow Tension spring of the threshing drum DSC62-영문판-10장.indd 7 2012-04-16 오후 6:26:10...

  • Page 172: Grain Loss Is Considerably Large

    Ineffective separation of The blower shift lever Switch the blower lever to WEAK.  grains Chaff Control Arm Switch the chaff control arm to OPEN. DSC62-영문판-10장.indd 8 2012-04-16 오후 6:26:10...

  • Page 173: Seperation Performance Is Poor

    The blower speed is too The blower adjustment Switch the blower lever to WEAK.  fast. lever Switch the chaff control arm to OPEN.  The chaff control arm is The chaff control arm open too much. DSC62-영문판-10장.indd 9 2012-04-16 오후 6:26:10...
  • Page 174 MEMO memo DSC62-영문판-10장.indd 10 2012-04-16 오후 6:26:10...

  • Page 175: Accessories/List Of Consumables

    11. Accessories/List of consumAbLes Accessories ..............11-2 List of consumAbLes ............ 11-3 DSC62-영문판-11장.indd 1 2012-04-16 오후 5:16:27...

  • Page 176: Accessories

    E6201-32443 Engine Oil Filter Cartridge C7810-46711 HST Engine Oil Filter Cartridge C7310-26111 Air filter C7110-12151 Hydraulic Oil Filtering core Acceptance certificate Instruction for Daedong Harvester Three Guarantees SE32-O00 User Manual SE32-P00 Catalogue of spare parts DSC62-영문판-11장.indd 2 2012-04-16 오후 5:16:27...

  • Page 177: List Of Consumables

    C7633-71121 V-belt (GRN.LB108) B108 DSC62-169 53961-7115-2 V-belt (RED LB42) DSC62-169 C7130-71171 GRN.LB39.25 belt B39.2 DSC62-169 C7130-71131 V-belt (RED LB109) B109 DSC62-169 C7130-71142 V-belt (REP.B74) 1B74 DSC62-169 52791-1288-1 V-belt (HP.LB53) 1B53 DSC62-179 C7130-71111 SB144(W800)belt 3B144 DSC62-169 DSC62-영문판-11장.indd 3 2012-04-16 오후 5:16:27...
  • Page 178 MEMO memo DSC62-영문판-11장.indd 4 2012-04-16 오후 5:16:28...

  • Page 179: Index

    12. INDEX INDEX..................12-1 DSC62-영문판-12장.indd 1 2012-04-16 오후 5:15:55...
  • Page 180 12-2 DSC62 ABOUT SERVICE ............2-2 BATTERY ..............8-25 ACCELERATOR LEVER ..........4-9 BLOCKED THRESHING CYLINDER ......10-3 ACCESSORIES/LIST OF CONSUMABLES ....11-1 BULLDOZING CROPS WITHOUT REAPING ..... 10-4 ACCESSORIES ............11-2 ACCESS TO THE STRAW CUTTER ......8-16 ADJUSTING OR REPLACING CAUTION DURING OPERATION .........
  • Page 181 HARVESTING INSTRUCTION ........7-1 HARVESTING INSTRUCTION ........1-8 HORN BUTTON ............4-4 DAILY CHECK ............... 5-2 HOW TO DRIVE THE COMBINE ........1-4 DISCHARGING GRAINS ..........7-19 HOW TO MOVE, DRIVE AND TRANSPORT THE COMBINE ..............6-1 DSC62-영문판-12장.indd 3 2012-04-16 오후 5:15:55...
  • Page 182 12- DSC62 MAINTENANCE ............8-1 HOW TO OPERATE THE DRIVING UNITS ....7-14 MAINTENANCE SCHEDULE TABLE ......8-2 HOW TO PARK ............. 6-6 HOW TO STOP AND PARK .......... 6-6 HOW TO USE METERS, GAUGES AND CONTROLLERS..4-1 NO. 2 THROWER IS CLOGGED ........ 10-8 INSPECTING THE POSITIVE (+) CABLE....
  • Page 183 THE ENGINE DOES NOT START ......10-5 THE FEEDING CONVEYOR FAILS TO CONVEY CROPS OR CROPS ARE UNEVENLY CONVEYED .. 10-6 SAFETY CAUTIONS ............. 1-1 THRESHING CLUTCH LEVER ........4-10 SEPERATION PERFORMANCE IS POOR ....10-9 THRESHING CLUTCH ROD ........8-39 DSC62-영문판-12장.indd 5 2012-04-16 오후 5:15:56...
  • Page 184 12- DSC62 THRESHING CROPS AT THE CORNERS OF A FIELD ............. 7-18 THRESHING SCREEN DISMANTLING METHOD ..8-62 THRESHING TREATMENT LEVER ......7-5 THRESHING UNIT ............8-29 TIPS FOR HARVESTING ..........7-18 TREATING ADJUSTMENT LEVER ......4-13 TROUBLESHOOTING ..........10-1 TURNING IN A FIELD ..........

Table of Contents