Daedong DSC62 Manual page 53

working state
Normal
Too many scattering crops
Too many crushed grains
adjUstment of fan Power
location of adjustment lever
Weak
Standard
Strong
•
the adjustment lever should be changed when the threshing
unit is running.
•
nozzle adjustment lever should be operated under the "engage"
state of threshing clutch. never operate when the threshing
unit is shut off.
DSC62-영문판-4장.indd 13
adjustment method
The second slot
Adjust the lever upward
Adjust the lever downward
working condition
When there is considerable loss and poor
Weak harvest
When the working speed is slow
Standard When under general working condition
When separation is bad and the drying
state of crops is not good
Strong
When the working speed is fast for lodged
crops
caUtion
HOW TO USE METERS, GAUGES AND CONTROLLERS 4-1
treating adjUstment
lever
(1) Treating adjustment lever
(A) Close (B) Standard (C) Open gear 1
(D) Open gear 2 (E) Open gear 3
t r e a t i n g a d j U s t m e n t
method
Adjust according to the working
state as follows.
4
E32O701A
2012-04-17 오후 4:55:06