Table of Contents
Advertisement
8-20 DSC62
SieVe caSe
(1) Tension Lever
(2) Oscillator Belt
(3) Tightening Bolt
(4) Fixing Bolt
(5) Oscillating Shaft Seal
reMOVing the SieVe caSe
1. Release the tension lever and
remove the oscillator belt.
2. Loosen the (two) bolts of the vi-
brating binder shaft.
DSC62-영문판-8장.indd 20
417O809A
(1) Separator
(A) Directions of Teeth
3. Rotate the diffuser (suction de-
vice) to adjust the direction of
saw-tooth according to the dia-
gram.
417O810A
(1) Sieve Case
(A) Pull out
4. Pull the sieve case out.
inStalling the SieVe caSe
1. Rotate the separator to set
up the direction of its teeth as
shown in the above figure.
2. Insert the sieve case.
417O811A
2012-04-17 오후 5:36:12
Advertisement
Table of Contents
