Table of Contents
Advertisement
1-18 DSC62
19.Label C7331-64221
When installing the chaff container, the rubber plate must be installed as speci-
按照图示位置安装振动筛总成调整橡胶挡板，否则容易磨损。
fied in the following figure. Otherwise, the container will easily be damaged.
1. After assembling the chaff
1. 振动筛组装完毕后，要把①
container, put 1 under 2,
置于②的底下，③置于1号
place 3 into the first chaff
搅龙的上面，把④⑤置于2
container, put 4 and 5
into the second chaff con-
号搅龙的上面，打开侧面清
tainer. And adjust them
扫口固定好橡胶板。并且，
through a cleaning port.
把⑥放置⑤后面。
place 6 behind 5 and fas-
2. 振动筛清理时，应先把①从
ten it.
② 的 底 下 拉 出 ， 拉 出 振 动
2. pull up 1 over the thresh-
筛，清扫干净，再按照上述
ing rotor. And remove the
方面安装固定。
screen to adjust it.
3. 固定好张紧轮。
3. fasten the tensioner.
DSC62-영문판-1장.indd 18
CAUTION
20.Label C7313-5357
2
CAUTION
never open the water tank cover
●
when the engine is running or imme-
diately after it is shut off, otherwise
potential contact with the hot water
or steam coming out may cause
scald.
When the engine compartment
●
cover needs to be opened for check
and maintenance due to engine
over-heating, please follow the fol-
lowing procedures:
1. Shut off the engine.
2. Open the engine compartment cover
after it is cooled for more than 30
minutes.
3. Conduct maintenance after it is
confirmed that there is no danger of
scald at the parts of the contact for
check and maintenance.
21.Label C7111-81111
CAUTION
Any contact with high temperature
positions such as muffler, exhaust
and engine may cause scald. So
never contact any high tempera-
ture position.
2012-04-17 오전 10:20:22
Advertisement
Table of Contents
