Table of Contents
Advertisement
8-56 DSC62
(1) Cutter Shaft Assembly
(A) Pull forward
6. Lower the ear side shaft sup-
porter and remove the cutter
shaft assembly.
DSC62-영문판-8장.indd 56
417O894A
(1) Direction of Rotation
(2) Direction of Rotation
7. Put the assembly down on a flat
and stable surface. Loose the
hex nuts.
8. After replacing the cutter blades,
install the blades by reversing
the previous steps. The direc-
tions of the blades and their
rotation are shown in the above
figure.
417O895A
2012-04-17 오후 5:36:50
Advertisement
Table of Contents
