Daedong DSC62 Manual page 52

4-12 DSC62
caUtion
•
when treating the debris,
please idle run the thresh-
ing unit for 0 seconds.
DSC62-영문판-4장.indd 12
lever for droPPer and
cUtter shifting
417O417A
(1) Lever for dropper and cutter shifting
(A) Cutter (B) Dropper
You can switch between the cutter
and dropper with this lever.
When operating, pull the lever to
the utmost. When harvesting is
over, the shifting lever should be
placed at the position of "Dropper".
fan Power adjUstment
method
E32O404A
(1) Fan adjustment lever (A) Weak
(B) Standard (C) Strong
Please refer to "Location and
Scope about Crops Standard
Threshing Adjustment" for adjust-
ment method.
1. Threshing clutch lever is placed
at "Start".
2. Use fan adjustment lever to ad-
just fan power in four stage from
"strong" to "weak".
3. Adjust speed adjusting lever
to the green upper limit under
the state of engaging threshing
clutch.
2012-04-17 오후 4:55:05