VM Motori MR 700 Instruction Manual page 78

– Do not operate the engine in a closed
and insufficiently ventilated environment;
the exhaust fumes are harmful and can
have serious consequences on people's
health.
– Do not keep using the engine if ano-
malies are detected and in particular if
suspect vibrations occur.
– In case of anomaly, stop immediately
the engine or reduce the speed as much
as possible and reach the closest assi-
stance centre.
– Start again the engine only when the
normal operating conditions have been
restored.
– Unless otherwise stated, all interven-
tions should be carried out when the en-
gine has been stopped, cooled down and
the ignition key has been removed. Those
authorized to carry out these interventions
should follow all the precautions needed
to guarantee the safety of the people
involved, in compliance with the require-
ments laid down in the applicable legisla-
tion regarding safety at the workplace.
Ed. 3 - 2012_11
– Keep the equipment as much efficient
as possible and carry out the scheduled
maintenance operations established by
the manufacturer. A good maintenance
will ensure the highest performance, a
longer working lifetime and a constant
compliance with safety requirements.
– Replace any worn part with original
spare parts. Use the oils and greases
recommended by the manufacturer. All
this will ensure the engine good operation
and the prescribed safety level.
– Do not throw away any polluting ma-
terial in the environment. Carry out their
disposal in compliance with the relevant
legislation in force.
– During all maintenance operations
always use the individual protection
clothing and/or devices indicated in the
operating instructions supplied by the
manufacturer and those provided by the
applicable legislation concerning safety at
the workplace.
– All maintenance operations should be
carried out by using suitable and efficient
equipment and tools.
6
MR 700
English