Troubleshooting; Motor Control Ecu Led Status Indicators - Raven SideKick Pro Installation & Operation Manual

CHAPTER
7

MOTOR CONTROL ECU LED STATUS INDICATORS

The Sidekick Pro ICD integrated motor control ECU displays the status of the injection pump with the following
ECU status indicators.
FIGURE 1. LED Status Indicators
LED Status Indicators
TABLE 1.
LED
Logic Power
High Current Power
CAN Status
Flow Switch State
Calibration Switch
State
Troubleshooting: Motor Control ECU LED Status Indicators
T ROUBLESHOOTING
C H A P T E R 7
If logic power is present at the motor control ECU, the logic power
indicator will be on.
If high current power is present at the motor control ECU, the high
current power indicator will be on.
The CAN status indicator will flash once per second if the motor
control ECU is communicating on the ISOBUS. If the motor control
ECU cannot communicate via the ISOBUS, the CAN status indicator
will flash four times per second.
The flow switch indicator will flash when flow is detected from both
sides of the pump.
The calibration switch indicator will flash when a metal object is
passed by the calibration switch sensor.
Logic Power
High Current Power
CAN Status
Flow Switch State
Cal Switch State
Calibration
Switch
Status Display
55