Chapter 7 Troubleshooting; Motor Control Node Led Status Indicators - Raven Sidekick Pro Installation And Operation Manual

CHAPTER
7

MOTOR CONTROL NODE LED STATUS INDICATORS

The Sidekick Pro integrated motor control node displays the status of the injection pump with the following node
status indicators.
FIGURE 1. LED Status Indicators
LED Status Indicators
TABLE 1.
LED
Logic Power
High Current Power
CAN Status
Flow Switch State
Troubleshooting: Motor Control Node LED Status Indicators
T ROUBLESHOOTING
C H A P T E R 7
If logic power is present at the motor control node, the logic power
indicator will be on.
If high current power is present at the motor control node, the high
current power indicator will be on.
The CAN status indicator will flash once per second if the motor
control node is communicating on the CANbus. If the motor control
node cannot communicate via the CANbus, the CAN status indicator
will flash four times per second.
The flow switch indicator will flash once per revolution of the
injection pump shaft.
Logic Power
High Current Power
CAN Status
Flow Switch State
Status Display
79